MiST - UART on Midi Model

https://github.com/mist-devel/mist-board/wiki

Moderators: Mug UK, Zorro 2, spiny, Greenious, Moderator Team

Post Reply
nico24
Atari maniac
Atari maniac
Posts: 97
Joined: Fri Aug 11, 2017 5:30 pm

MiST - UART on Midi Model

Post by nico24 »

Are there any UART pins available for the MiST model that has MIDI included on the PCB. I fear that it is just replaced by the MIDI pins, but has some additional logic attached and so is not possible to just select certain MIDI pins either.

Thanks in advance.
Nick
slingshot
Atari God
Atari God
Posts: 1838
Joined: Mon Aug 06, 2018 3:05 pm

Re: MiST - UART on Midi Model

Post by slingshot »

Just use MIDI OUT pins 2 and 5 for TX, and MIDI IN pins 4 and 5 for RX.
nico24
Atari maniac
Atari maniac
Posts: 97
Joined: Fri Aug 11, 2017 5:30 pm

Re: MiST - UART on Midi Model

Post by nico24 »

Thank you sir! Most helpful.
Post Reply

Return to “MiST”