question about commands column in ACE Tracker
Moderators: Mug UK, lotek_style, Moderator Team
question about commands column in ACE Tracker
I'm working on some tracks with ACE Tracker and have some questions about the commands in the commands column. I have read the manual but I could not find a command table page.
I find out a few commands:
U = PU - pitch bend up
D = PD - pitch bend down
P = Pan
J = J - jump to patter xyz
N = P(8 note) - detune
On an a picture in the manual I saw an LFO command and in some other tracks the VCF command, but I could not find a key on the keyboard.
thanks for help.
chris
I find out a few commands:
U = PU - pitch bend up
D = PD - pitch bend down
P = Pan
J = J - jump to patter xyz
N = P(8 note) - detune
On an a picture in the manual I saw an LFO command and in some other tracks the VCF command, but I could not find a key on the keyboard.
thanks for help.
chris
Falcon030 14 MB+Dayna Port::MegaSt4+Hydra, Overscan & UltraSatanDisk
-
- Retro freak
- Posts: 13
- Joined: Mon Feb 11, 2013 8:58 am
Re: question about commands column in ACE Tracker
Hi,
Can't belive I missed that in the manual... here we go:
Key(s) Parameter Value
[1]+[A] VCA Attack 0-3F
[1]+[D] VCA Decay 0-3F
[1]+ VCA Sustain 0-3F
[1]+[R] VCA Release 0-3F
[2]+[A] VCF Attack 0-3F
[2]+[D] VCF Decay 0-3F
[2]+ VCF Sustain 0-3F
[2]+[R] VCF Release 0-3F
[2]+[C] VCF Cutoff 0-3F
[2]+[E] VCF Env. Depth 0-3F
[2]+[O] VCF resOnance 0-3F
[3]+[F] LFO Freq. 0-3F
[3]+[D] LFO Depth 0-3F
[P] Pan 0-3F (0 is left 3F is right, 20 is middle)
[N] Portamento Note 0-FF (number of lines to slide between the two notes)
00 C-3 A1 --- -- Example that slides from C-3 to C-4 in two pattern lines. (Slide is finished when we reach pattern line 3)
01 C-4 -- P02 --
Portamento Up 0-F and 0-F where the first value defines number of semi notes and the second number of pattern lines.
[D] Portamento Down 0-F and 0-F where the first value defines number of semi notes and the second number of pattern lines.
00 C-3 A1 U22 -- Example that slides from C-3 to D-3 in two pattern lines. (Slide is finished when we reach pattern line 2)
[J] Jump to position 0-FF
To set tempo, just set a number without a command:
00 C-3 A1 -70 -- Sets tempo to 70 (70 is just a number - not related to any BPM or so)
Can't belive I missed that in the manual... here we go:
Key(s) Parameter Value
[1]+[A] VCA Attack 0-3F
[1]+[D] VCA Decay 0-3F
[1]+ VCA Sustain 0-3F
[1]+[R] VCA Release 0-3F
[2]+[A] VCF Attack 0-3F
[2]+[D] VCF Decay 0-3F
[2]+ VCF Sustain 0-3F
[2]+[R] VCF Release 0-3F
[2]+[C] VCF Cutoff 0-3F
[2]+[E] VCF Env. Depth 0-3F
[2]+[O] VCF resOnance 0-3F
[3]+[F] LFO Freq. 0-3F
[3]+[D] LFO Depth 0-3F
[P] Pan 0-3F (0 is left 3F is right, 20 is middle)
[N] Portamento Note 0-FF (number of lines to slide between the two notes)
00 C-3 A1 --- -- Example that slides from C-3 to C-4 in two pattern lines. (Slide is finished when we reach pattern line 3)
01 C-4 -- P02 --
Portamento Up 0-F and 0-F where the first value defines number of semi notes and the second number of pattern lines.
[D] Portamento Down 0-F and 0-F where the first value defines number of semi notes and the second number of pattern lines.
00 C-3 A1 U22 -- Example that slides from C-3 to D-3 in two pattern lines. (Slide is finished when we reach pattern line 2)
[J] Jump to position 0-FF
To set tempo, just set a number without a command:
00 C-3 A1 -70 -- Sets tempo to 70 (70 is just a number - not related to any BPM or so)
Re: question about commands column in ACE Tracker
Hi,
wow. I'm impressed about all the parameter.
many thanks
chris
wow. I'm impressed about all the parameter.
many thanks
chris
Falcon030 14 MB+Dayna Port::MegaSt4+Hydra, Overscan & UltraSatanDisk
-
- Retro freak
- Posts: 13
- Joined: Mon Feb 11, 2013 8:58 am
Re: question about commands column in ACE Tracker
Looking forward to hear some modules!
Re: question about commands column in ACE Tracker
Here we go
https://soundcloud.com/xfalcon-dma/dark-groove
https://soundcloud.com/xfalcon-dma/resolounge
https://soundcloud.com/xfalcon-dma/dark-groove
https://soundcloud.com/xfalcon-dma/resolounge
Falcon030 14 MB+Dayna Port::MegaSt4+Hydra, Overscan & UltraSatanDisk
Re: question about commands column in ACE Tracker
Very nice! simple but intense
Re: question about commands column in ACE Tracker
Thanks for sharing.xfalcon wrote:Here we go
https://soundcloud.com/xfalcon-dma/dark-groove
https://soundcloud.com/xfalcon-dma/resolounge
Are the modules available some place as well?
-
- Retro freak
- Posts: 13
- Joined: Mon Feb 11, 2013 8:58 am
Re: question about commands column in ACE Tracker
Thanks for sharing, makes me very happy to hear something new made with 2.0! I esp. like the resolunge module, good work!
-
- Retro freak
- Posts: 13
- Joined: Mon Feb 11, 2013 8:58 am
Re: question about commands column in ACE Tracker
Oh, and I did not forget about your patches, will upload them when next ACE is released.
Re: question about commands column in ACE Tracker
evil wrote: ...
Are the modules available some place as well?
Not yet, I have to rewrite my website. But in the moment I'm writing new songs. And that's more fun than writing html.
Falcon030 14 MB+Dayna Port::MegaSt4+Hydra, Overscan & UltraSatanDisk
Re: question about commands column in ACE Tracker
Hi,
the modules and some mp3 from ACE-Midi are available at:
http://demozoo.org/sceners/54315/
the modules and some mp3 from ACE-Midi are available at:
http://demozoo.org/sceners/54315/
ThanksThomasNewBeat wrote:Oh, and I did not forget about your patches, will upload them when next ACE is released.
Falcon030 14 MB+Dayna Port::MegaSt4+Hydra, Overscan & UltraSatanDisk