NEW OR UPDATED ARCADE CORES

https://github.com/mist-devel/mist-board/wiki

Moderators: Mug UK, Zorro 2, spiny, Greenious, Moderator Team

Post Reply
User avatar
RealLarry
Obsessive compulsive Atari behavior
Obsessive compulsive Atari behavior
Posts: 146
Joined: Sat Jan 31, 2015 12:05 pm
Location: San Junipero

Re: NEW OR UPDATED ARCADE CORES

Post by RealLarry »

Always at your service. And we THANK YOU!
On the other side of the screen, it all looks so easy.
User avatar
RealLarry
Obsessive compulsive Atari behavior
Obsessive compulsive Atari behavior
Posts: 146
Joined: Sat Jan 31, 2015 12:05 pm
Location: San Junipero

Re: NEW OR UPDATED ARCADE CORES

Post by RealLarry »

Gehstock wrote:I started to extend the arcade cores with a rotatable OSD. Thanks for that goes to Slingshot. At the same time I remove a few mistakes. Many cores lack the signal for YPBPR. Bugreport please here.
Same cores from the last weeks tested on ypbpr with and w/o scandoubler - screen is a LG 32LN5707:

Code: Select all

                        ypbpr1/sd0/works        ypbpr1/sd1/works
Azurian                 no                      yes
Bagman                  yes                     yes
Birdiy                  no                      yes, but pink
BlackHole               no                      yes, but unstable
Catacomb                no                      yes, but unstable
Centipede               no                      no
ComputerSpace_MiST      no                      no
CrazyKong               yes                     yes, but garbage
Galaxian                no                      yes, but unstable
KingBaloon              no                      yes, but unstable
MoonCresta              no                      yes, but unstable
MrDoNightmare           no                      yes, but unstable
Omega                   no                      yes, but unstable
Orbitron                no                      yes, but unstable
Pisces                  no                      yes, but unstable
SuperBreakout           yes                     yes
WarOfTheBugs            no                      yes, but unstable
ZigZag                  no                      yes, but unstable
burger_time_mist        no                      yes
burnin_rubber_mist      no                      no
canyon_bomber           yes, but pink           yes, but pink
dominos                 yes, but pink           yes, but pink
phoenix_mist            no                      yes
sprint1                 yes, but pink           yes, but pink
sprint2                 yes, but pink           yes, but pink

ypbpr1: ypbpr=1
sd0: scandoubler_disable=0
sd1: scandoubler_disable=1
pink means core works, but background is completely colored pink
unstable means core works, but screen shivers and has partially wrong colors
Pictures will follow.
On the other side of the screen, it all looks so easy.
Gehstock
Captain Atari
Captain Atari
Posts: 431
Joined: Wed Dec 21, 2016 7:18 pm
Location: EastGermany

Re: NEW OR UPDATED ARCADE CORES

Post by Gehstock »

ypbpr will be fixed with the next updates, I missed a signal there(pink Picture)
Last edited by Gehstock on Fri Mar 08, 2019 8:57 am, edited 1 time in total.
User avatar
jotego
Captain Atari
Captain Atari
Posts: 227
Joined: Wed May 04, 2016 10:02 am
Location: Valencia (Spain)
Contact:

Re: NEW OR UPDATED ARCADE CORES

Post by jotego »

RealLarry wrote:Donation time!
I just became a patreon to jotego today. How about slingshot, sorgelig, gehstock and all the others? How and where to donate to you guys?
Thanks a lot! I am preparing a surprise core release for the time we get to 150 patrons. :D
--
Source code of all my cores here.
My Patreon page here.
User avatar
RealLarry
Obsessive compulsive Atari behavior
Obsessive compulsive Atari behavior
Posts: 146
Joined: Sat Jan 31, 2015 12:05 pm
Location: San Junipero

Re: NEW OR UPDATED ARCADE CORES

Post by RealLarry »

jotego wrote:
RealLarry wrote:Donation time!
I just became a patreon to jotego today. How about slingshot, sorgelig, gehstock and all the others? How and where to donate to you guys?
Thanks a lot! I am preparing a surprise core release for the time we get to 150 patrons. :D
Whoa, that sounds exciting! Let me guess: Turret Tower? Cruis'n USA? Oh, damn, wait, I was just dreamin'! :mrgreen:
On the other side of the screen, it all looks so easy.
Gehstock
Captain Atari
Captain Atari
Posts: 431
Joined: Wed Dec 21, 2016 7:18 pm
Location: EastGermany

Re: NEW OR UPDATED ARCADE CORES

Post by Gehstock »

Maybe Vulgus?
User avatar
RealLarry
Obsessive compulsive Atari behavior
Obsessive compulsive Atari behavior
Posts: 146
Joined: Sat Jan 31, 2015 12:05 pm
Location: San Junipero

Re: NEW OR UPDATED ARCADE CORES

Post by RealLarry »

Gehstock wrote:Maybe Vulgus?
I didn't know that yet. Nice game! But seems to be too easy for Jotego ;)
On the other side of the screen, it all looks so easy.
seastalker
Captain Atari
Captain Atari
Posts: 311
Joined: Sun May 15, 2016 3:44 pm

Re: NEW OR UPDATED ARCADE CORES

Post by seastalker »

RealLarry - I live for the day to see some classic Sega System 16 and Capcom CPS (even 1 if not II) to get some Space Harrier, Altered Beast, Golden Axe, and especially Strider. Side note: are you the creator of the Leisure games and as featured in Heavy Metal Jesus's youtube house visit? If so, I've enjoyed the games in the past and am getting back into Sierra Games. Thank you!
User avatar
RealLarry
Obsessive compulsive Atari behavior
Obsessive compulsive Atari behavior
Posts: 146
Joined: Sat Jan 31, 2015 12:05 pm
Location: San Junipero

Re: NEW OR UPDATED ARCADE CORES

Post by RealLarry »

seastalker wrote:RealLarry - I live for the day to see some classic Sega System 16 and Capcom CPS (even 1 if not II) to get some Space Harrier, Altered Beast, Golden Axe, and especially Strider.
Have patience. I'm sure that there is much more coming. And in the meantime, there is MAME for your pleasure :)
seastalker wrote:Side note: are you the creator of the Leisure games and as featured in Heavy Metal Jesus's youtube house visit? If so, I've enjoyed the games in the past and am getting back into Sierra Games. Thank you!
No, unfortunately I'm neither the creator of the great Leisure games nor have I'm appeared at MetalJesus, but thank you :) These credits go to Al Lowe @ Sierra. I'm just the elder brother of Larry on another continent and enjoy the life, the women and the tons of my retro consoles and their games. :angel:
On the other side of the screen, it all looks so easy.
Gehstock
Captain Atari
Captain Atari
Posts: 431
Joined: Wed Dec 21, 2016 7:18 pm
Location: EastGermany

Re: NEW OR UPDATED ARCADE CORES

Post by Gehstock »

New Arcade TripleDrawPoker
IMG_20190311_183528.jpg
IMG_20190311_183359.jpg
You do not have the required permissions to view the files attached to this post.
Darfpga
Obsessive compulsive Atari behavior
Obsessive compulsive Atari behavior
Posts: 125
Joined: Thu Feb 02, 2017 10:07 pm

Re: NEW OR UPDATED ARCADE CORES

Post by Darfpga »

Traverse USA arcade game VHDL source code for DE10-lite available at :

https://sourceforge.net/projects/darfpg ... averse_usa

TV 15kHz mode only
Sound OK.
Cocktail mode OK.

Around 770kbits internal ram required (mostly for ROM regions).

Feel free port to. MiST/MiSTer.
Gehstock
Captain Atari
Captain Atari
Posts: 431
Joined: Wed Dec 21, 2016 7:18 pm
Location: EastGermany

Re: NEW OR UPDATED ARCADE CORES

Post by Gehstock »

IREM M52 Nice :D

Thank You
User avatar
jotego
Captain Atari
Captain Atari
Posts: 227
Joined: Wed May 04, 2016 10:02 am
Location: Valencia (Spain)
Contact:

Re: NEW OR UPDATED ARCADE CORES

Post by jotego »

Gehstock wrote:New Arcade TripleDrawPoker
IMG_20190311_183528.jpg
IMG_20190311_183359.jpg
I see you are rotating the OSD too! Cool :-D
--
Source code of all my cores here.
My Patreon page here.
digitron
Atari maniac
Atari maniac
Posts: 92
Joined: Sat Apr 20, 2019 7:27 pm

Re: NEW OR UPDATED ARCADE CORES

Post by digitron »

seastalker wrote:RealLarry - I live for the day to see some classic Sega System 16 and Capcom CPS (even 1 if not II) to get some Space Harrier, Altered Beast, Golden Axe, and especially Strider. Side note: are you the creator of the Leisure games and as featured in Heavy Metal Jesus's youtube house visit? If so, I've enjoyed the games in the past and am getting back into Sierra Games. Thank you!
+1, all the CPS2 games! Would it be an improvement over the MAME emu?
User avatar
vebxenon
Atari God
Atari God
Posts: 1011
Joined: Fri Apr 24, 2015 12:10 pm

Re: NEW OR UPDATED ARCADE CORES

Post by vebxenon »

All Pac-Man hardware releases and Midway 8080 arcade cores have been updated thanks to Slingshot and Gehstock :D :cheers:
Just a computer and videogame lover :)

- Atari Jr 2600 clone
- Atari 7800 Peritel
- Atari XEGS
- Atari Lynx II
- Atari Jaguar
- MiST Board
slingshot
Atari God
Atari God
Posts: 1807
Joined: Mon Aug 06, 2018 3:05 pm

Re: NEW OR UPDATED ARCADE CORES

Post by slingshot »

Don't expect big changes :) Ok, the Midway ones are working on TV now. But would be good to have the real color generator for some variants (like for Lunar Rescue).
User avatar
DrOG
Atari Super Hero
Atari Super Hero
Posts: 731
Joined: Sun Jul 31, 2016 8:23 pm
Location: Gyula, Hungary

Re: NEW OR UPDATED ARCADE CORES

Post by DrOG »

Thanks for repairing the Pacman Hardware cores as well! :cheers:
Gehstock
Captain Atari
Captain Atari
Posts: 431
Joined: Wed Dec 21, 2016 7:18 pm
Location: EastGermany

Re: NEW OR UPDATED ARCADE CORES

Post by Gehstock »

slingshot wrote:Don't expect big changes :) Ok, the Midway ones are working on TV now. But would be good to have the real color generator for some variants (like for Lunar Rescue).
Can´t find Schematics for that
slingshot
Atari God
Atari God
Posts: 1807
Joined: Mon Aug 06, 2018 3:05 pm

Re: NEW OR UPDATED ARCADE CORES

Post by slingshot »

Gehstock wrote:
slingshot wrote:Don't expect big changes :) Ok, the Midway ones are working on TV now. But would be good to have the real color generator for some variants (like for Lunar Rescue).
Can´t find Schematics for that
Yeah, I found one, but it's very badly scanned and mostly unreadable.
slingshot
Atari God
Atari God
Posts: 1807
Joined: Mon Aug 06, 2018 3:05 pm

Re: NEW OR UPDATED ARCADE CORES

Post by slingshot »

Meanwhile I've made Traverse USA work on MiST (from @darfpga). It really uses a strange display geometry, and YPbPr does not really like it, but otherwise it's fine. The core uses a lot of RAM, and must use the SDRAM, too (need a TRAVERSE.ROM on the SD-Card). @Gehstock, I've sent a PR with that.
Gehstock
Captain Atari
Captain Atari
Posts: 431
Joined: Wed Dec 21, 2016 7:18 pm
Location: EastGermany

Re: NEW OR UPDATED ARCADE CORES

Post by Gehstock »

Thank you
User avatar
RealLarry
Obsessive compulsive Atari behavior
Obsessive compulsive Atari behavior
Posts: 146
Joined: Sat Jan 31, 2015 12:05 pm
Location: San Junipero

Re: NEW OR UPDATED ARCADE CORES

Post by RealLarry »

slingshot wrote:Meanwhile I've made Traverse USA work on MiST (from @darfpga). It really uses a strange display geometry, and YPbPr does not really like it, but otherwise it's fine. The core uses a lot of RAM, and must use the SDRAM, too (need a TRAVERSE.ROM on the SD-Card). @Gehstock, I've sent a PR with that.
Great work, many thanks for that! I've tested this core on VGA and YPbPr and it's working fine on both setups (but I don't know whether Gehstock has screwed into it or not).
On the other side of the screen, it all looks so easy.
User avatar
vebxenon
Atari God
Atari God
Posts: 1011
Joined: Fri Apr 24, 2015 12:10 pm

Re: NEW OR UPDATED ARCADE CORES

Post by vebxenon »

Just a computer and videogame lover :)

- Atari Jr 2600 clone
- Atari 7800 Peritel
- Atari XEGS
- Atari Lynx II
- Atari Jaguar
- MiST Board
Gehstock
Captain Atari
Captain Atari
Posts: 431
Joined: Wed Dec 21, 2016 7:18 pm
Location: EastGermany

Re: NEW OR UPDATED ARCADE CORES

Post by Gehstock »

And some New, most are WIP but
https://github.com/Gehstock/Mist_FPGA/t ... agman_MiST is Done
User avatar
vebxenon
Atari God
Atari God
Posts: 1011
Joined: Fri Apr 24, 2015 12:10 pm

Re: NEW OR UPDATED ARCADE CORES

Post by vebxenon »

Gehstock wrote:And some New, most are WIP but
https://github.com/Gehstock/Mist_FPGA/t ... agman_MiST is Done
Great! :cheers: Thanks for your work :D
Just a computer and videogame lover :)

- Atari Jr 2600 clone
- Atari 7800 Peritel
- Atari XEGS
- Atari Lynx II
- Atari Jaguar
- MiST Board
Post Reply

Return to “MiST”