Read Atari floppies on Mac or PC or Amiga

All about the serious stuff.

Moderators: Mug UK, Zorro 2, Moderator Team

Post Reply
User avatar
stradivarius
Atari User
Atari User
Posts: 31
Joined: Tue Jun 19, 2012 9:07 pm
Location: Croatia

Read Atari floppies on Mac or PC or Amiga

Post by stradivarius »

Hello!
I have few Atari floppy disks that I need to read on Mac or PC.
Can I do that with emulator or other program?
I have been try with few Atari st emulator with usb floppy drive on Mac OS X and on Mac OS 7 but with no success.
How about Atari St emulator on Amiga?
I dont have Ultrasatan...
Thank you for any advice.
Stradivarius
Last edited by stradivarius on Thu Jun 20, 2019 7:38 am, edited 1 time in total.
User avatar
calimero
Fuji Shaped Bastard
Fuji Shaped Bastard
Posts: 2352
Joined: Thu Sep 15, 2005 10:01 am
Location: STara Pazova, Serbia
Contact:

Re: Read Atari floppies on Mac or PC or Amiga

Post by calimero »

Format floppy on PC and then use it on Atari.

---

or you have floppy disks in Atari specific format (more than 79 tracks and more sectors...) and you want to read them on PC or Amiga because your Atari does not have "connection" to PC (so you can not move files from Atari to PC)?
using Atari since 1986.http://wet.atari.orghttp://milan.kovac.cc/atari/software/ ・ Atari Falcon030/CT63/SV ・ Atari STe ・ Atari Mega4/MegaFile30/SM124 ・ Amiga 1200/PPC ・ Amiga 500 ・ C64 ・ ZX Spectrum ・ RPi ・ MagiC! ・ MiNT 1.18 ・ OS X
jvaltane
Atari User
Atari User
Posts: 32
Joined: Mon Dec 16, 2013 11:30 pm
Location: Finland, Helsinki

Re: Read Atari floppies on Mac or PC or Amiga

Post by jvaltane »

I was able to read 720k Atari disks without problem with Amiga + crossdos and Mac (System7). Writing also kind of works with these.

I prefer disk image myself. Easier to handle and use/read with emulators if needed.

You could try with Omniflop application. It should also work with 800k floppies. ...but I don't know does it work with USB-foppydrive. I have also read somewhere that some USB-floppydrives works properly only with 1.44M floppies. Anyway images this application creates should be readable with emulators.

If Atari has enough memory, ram-disk might work instead of HD. Read images with real machine to ram-disk and then transfer images to PC using serial or what ever possible transfer methods you have.

There are also some special hardware to help read disks with PC. For example KryoFlux (USB) or Catweasel (PCI). I think KryoFlux is the one disk preserving people uses nowadays. Not sure what kind of images it is possible to create with tools for these. Not sure are these image-format(s) emulator compatible. Probably some old PC with internal floppy is cheaper to get than any of these hardware solutions.
- jvaltane
joska
Hardware Guru
Hardware Guru
Posts: 4721
Joined: Tue Oct 30, 2007 2:55 pm
Location: Florø, Norway
Contact:

Re: Read Atari floppies on Mac or PC or Amiga

Post by joska »

USB floppydrives will in my experience only work with DOS-formatted disks with 80 tracks and either 9 (DD/720kb) or 18 (HD, 1440kb) sectors per track. Any other format will not be recognised. Please note that disks formatted from the desktop with TOS < 1.4/1.6 are not DOS compatible.

You will either need a real Atari or a PC with a classic floppy disk controller to read disks that can't be read with a USB drive.
Jo Even

VanillaMiNT - Firebee - Falcon060 - Milan060 - Falcon040 - MIST - Mega ST - STM - STE - Amiga 600 - Sharp MZ700 - MSX - Amstrad CPC - C64
czietz
Hardware Guru
Hardware Guru
Posts: 1239
Joined: Tue May 24, 2016 6:47 pm

Re: Read Atari floppies on Mac or PC or Amiga

Post by czietz »

Both USB floppy drives I have tested can also read floppy disks with other number of sectors per track, for example 800 kB disks (10 sectors per track). For that, the disks either needs a MS-DOS compatible boot sector specifying that number of sectors or the drive needs to be told the disk format via the appropriate command (MODE SELECT, flexible disk page). Unfortunately, neither of the drives can be coerced to read more than 80 tracks, though.
PeterS
Captain Atari
Captain Atari
Posts: 324
Joined: Fri Nov 09, 2007 1:53 pm
Location: England, GB

Re: Read Atari floppies on Mac or PC or Amiga

Post by PeterS »

I remember editing a byte on the floppy so that it could be read by a PC or ST as long as the disc had the right number of tracks and sectors in the first place. It had something to do with a bug in the old cp/m code that M$ used when "writing" DOS.
Post Reply

Return to “Applications”