NEW OR UPDATED ARCADE CORES

[DanyPPC]

It reminds me a classic game on Spectrum.

[RobertK]

New Core Dottori Kun on my Github

The MAME history.dat file has some trivia on this machine:

This is a game that Sega used to test the hardware, it was developing during the late 1980s through the early 1990s. It's a very small board (about 10cm x 10cm). It was never fully developed or intended to be released to the public.

[Gehstock]

looks like parent of pacman

Someone had the same Idea
http://www.chrismcovell.com/dottorikun.html

IMG_20181003_002443.jpg

Edit: !!Colors Repaired

IMG_20181003_001240.jpg

Update, Core Includes now 3 Different Roms (Old, New, Mod). Reset after Switch

[DanyPPC]

Nice !

[RobertK]

Tested Burger Time (OK) and Berzerk (the issue persists)

@Gehstock: thanks for the Burger Time update, the colours look great now!

But I can confirm that the Berzerk 15KHz picture problem is still there, the game display is too big to entirely fit on the screen. VGA is perfect however. The entire Berzerk core is just fantastic!

BTW, I noticed that your Colecovision core works basically as good as the old one (in some parts maybe better), but it seems that it can't load homebrew games anymore, while the old core could. Try a few of the free (with the download symbol) games listed here, like Pooyan for example.

[Gehstock]

New Core King & Balloon. VGA needs a Fix(next Days), RGB is working.

2018-10-22_MIST_KingAndBalloon_01_a.JPG

2018-10-22_MIST_KingAndBalloon_02b.JPG

[brunosilva]

hi
does anyone tried to swap roms and create more arcade cores?

https://github.com/Gehstock/Mist_FPGA/t ... 20Hardware

Thanks

[vebxenon]

Thanks Gehstock as always for your work!

[SmokeMonster]

Awesome work on King & Balloon and Berzerk. Are those still in WIP status I take it?

Edit: Oh, I just realized I'm in the MiST subforum, not MiSTer.

[Gehstock]

New Arcade Zig Zag, Big Thanks to Sorgelig

[DanyPPC]

WoW !
Many thanks.

[brunosilva]

@Gehstock

in the last organization in arcade cores, i think you place a folder inside a folder that shouldn't be:

https://github.com/Gehstock/Mist_FPGA/t ... kHole_MiST

blackhole shouldn't be inside z80 based folder?

Thanks

[Gehstock]

Thanks

[RealLarry]

Donation time!
I just became a patreon to jotego today. How about slingshot, sorgelig, gehstock and all the others? How and where to donate to you guys?

[Lroby74]

Donation time!
I just became a patreon to jotego today. How about slingshot, sorgelig, gehstock and all the others? How and where to donate to you guys?

I am already donating 1 euro at month via Patreon

[Gehstock]

Donation time!
I just became a patreon to jotego today. How about slingshot, sorgelig, gehstock and all the others? How and where to donate to you guys?

Not for me. I have a Job and this here is just for Fun. Thank you anyway.

Test the new Updates , this is enough.

[slingshot]

Donation time!
I just became a patreon to jotego today. How about slingshot, sorgelig, gehstock and all the others? How and where to donate to you guys?

Not for me. I have a Job and this here is just for Fun. Thank you anyway.

Test the new Updates , this is enough.

Same applies to me.

[Gehstock]

I started to extend the arcade cores with a rotatable OSD. Thanks for that goes to Slingshot. At the same time I remove a few mistakes. Many cores lack the signal for YPBPR. Bugreport please here.

[DanyPPC]

Thanks Gehstock

[brunosilva]

@Gehstock - possible at the same time adding open *.rom file from OSD like 1942?

Thanks

[Gehstock]

Sure but Why?

[brunosilva]

because many cores could have hacked roms and alternative versions of roms...
1942, 1943, gng and many other have this... i'm preparing packs of roms for each core
(in 1942 you can try a galaga X hack with C64 music)

because mister has the possibility to have folders, with this you can have several folder with the core and a new rom...

maybe someday we also have open *.rom file in mister

that's why i asked

[squid4]

Any possibility to get the Williams arcades converted or is there an issue on the MiST?

[RealLarry]

I started to extend the arcade cores with a rotatable OSD. Thanks for that goes to Slingshot. At the same time I remove a few mistakes. Many cores lack the signal for YPBPR. Bugreport please here.

I've tested all cores from the last weeks on VGA - screen is a Fujitsu E19-7:
https://drive.google.com/open?id=1HFdxR ... 9K3P_ETH7r

Code: Select all

Azurian                 works, line(s) missing
Bagman                  works, pixels at right
Birdiy                  starts, can't insert coin
BlackHole               works, no issues
Catacomb                works, no issues
Centipede               works, gfx glitches
ComputerSpace_MiST      works, sound distortion, gfx glitches
CrazyKong               works, no issues
Galaxian                works, no issues
KingBaloon              works, no issues
MoonCresta              works, no issues
MrDoNightmare           works, no issues
Omega                   works, no issues
Orbitron                works, no issues
Pisces                  works, line(s) missing
SuperBreakout           works, no issues
WarOfTheBugs            works, line(s) missing
ZigZag                  works, no issues
burger_time_mist        works, no issues
burnin_rubber_mist      works, no issues
canyon_bomber           works, no issues
dominos                 works, no issues
phoenix_mist            works, no issues
sprint1                 works, no issues
sprint2                 works, no issues

Next run will be on YPBPR.
A little anoying thing is that for some core I've to rotate my screen to the left, for some others to the right. But that's nitpicking over tiny details.

[Gehstock]

Thank you