Comments? (no, have not powered up yet
)EtherNat direciion on CT60
Moderators: Mug UK, [ProToS], lp, moondog/.tSCc., Moderator Team
EtherNat direciion on CT60
Couldn't find a photo or docs on which direction the EtherNat is fitted atop the CT60. Photos I've seen look to be a newer version.
Comments? (no, have not powered up yet )
Comments? (no, have not powered up yet
)You do not have the required permissions to view the files attached to this post.
-
mikro
- Hardware Guru
- Posts: 2271
- Joined: Sat Sep 10, 2005 11:11 am
- Location: Kosice, Slovakia
- Contact:
Re: EtherNat direciion on CT60
Here you have one, surprisingly from Nature's homepage:
So you're holding it exactly the opposite way. ;)
Btw one has to be really careful with fitting -- I once fried mine just with fitting it one pin to the left (yep, didn't double check before powering on!)
So you're holding it exactly the opposite way. ;)
Btw one has to be really careful with fitting -- I once fried mine just with fitting it one pin to the left (yep, didn't double check before powering on!)
Re: EtherNat direciion on CT60
Had it the other way, noticed in the photo it had been rotated. Did find one single photo on all of Google like this rev. Been using 30mm extensions working with the SV
Did the same with a CT60 AND motherboard having the ST RAM module offset, that hurt.....down there with a magnifier and flash light every time now.
Did the same with a CT60 AND motherboard having the ST RAM module offset, that hurt.....down there with a magnifier and flash light every time now.