Vortex ATonce Plus/286 disk needed

[Robson]

Hello,

I have an stfm board with this card installed and would like to test it but i have no software.
Can somebody share please.

Vortex Atonce -Plus /286

Thanks.

[Robson]

Answered my own question, found it.
So in case you need the drivers for ATonce/ ATonce Plus ans ATonce 386SX, here is my find.

[Robson]

Allright...so next question is, how to use it?

When I start the Atonce.prg, the system reboots and I can see this pic, however keyboard doesn't work, only CTRL+ALT DEL (and returning to this screen).
Even when I set the system to boot from floppy, the last message is different, basically waiting for a MSDOS boot floppy in drive A and a key press, but obviously nothing happens, since no keyboard. I checked the settings in install.prg, all seems fine, and even tried the german option instead of ASCII (in Keyboard menu) - no difference.

It's and STFM and only floppies, no HDD connected.

Suggestions?

20150730_004745_2.jpg

[FujiMan]

Hi,

I will try this on my machine tomorrow and see what is happening.

FujiMan

[Robson]

Thanks.
All info would help me at this stage to understand what should happen, what is normal and what's not to see happening.

[Robson]

Looking good right now.
Maybe later I try to run from HD but I'm happy this works.

11223571_10154228937232715_4191481306993720050_o.jpg

[FujiMan]

Hey,
I just fired it up with DOS 3.3. Works great. The earlier version of the software that I have doesn't work with FreeDOS. I guess I'll need to make a boot floppy.
FujiMan

[Robson]

Thanks for checking.

I got the image file from here.
http://jorisvr.nl/freedos.html

Then used diskwrite:
http://freeextractor.sourceforge.net/diskwrite/


£9.99 well spent on this card+board with ram upgrade kit+stfm case.

[Frank B]

Does it support 20x87 FPU?

[Robson]

Does it support 20x87 FPU?

Not this one.