common Rf issues with nemesis + many chipset accelorators

[simbo]

http://cgi.ebay.co.uk/1-8-ZIF-Hard-Disk ... 2617620217


i found this to complete the cable i made

the cable is setup as
ide cf master
sccard slave {switched power}
ide hdd 1.8" 60GB slave power switched from a broken ipod via the connector above
i liked this connector as it has a standard molex power and 50pin ide

cdrom drive ide 8 speed also slave and power switched and just fits in the case ,,,as it has two 5 1/4 " bays
on is use for a new floppy i got from atari freeks .com
i used 4 two ways switches for power
as i left one incase i needed another drive
i was thilled when the 1.8 worked and i got a working fat setup to 8 parts and one big ntsc for pc interchange
this is placed in an internal case i can clip onto the top of the rack

for the nemesis i added a 55mhz ttl clock oscillator and a ttl selector to allow me to use
16/20/25bus and 32 48 or 55 mhz chipset clocks

ill take some pics this weekend when i get back to it

but looking good !!!

and a nice reuse of what is a good ide drive ,, just needs a small adapter and a box...

if anyone needs a 55mhz crystal oscillator can square 4 pin pm me

[EvilFranky]

Did you ever get round to doing some benches when clocked at 55Mhz?

[simbo]

not yet ive just had no time

ill get around to it soon

ive added the selector control and i can choose 48 or 55 mhz main clock
from a switch on the front of the rack
ive still to sort out the inside and mount the sdcard etc etc etc too much still on my case just now

winter for my own machine i feel

[EvilFranky]

From some of the forum posts I have read, it seems like you are very busy with other peoples stuff!