Best (safe) way to pull out ct60e

Discuss CT60/CT63, CTPCI, SuperVidel and EtherNAT hardware here.

Moderators: Mug UK, [ProToS], lp, moondog/.tSCc., Moderator Team

Post Reply
tjam
Atari User
Atari User
Posts: 31
Joined: Sun Dec 09, 2018 10:54 pm
Location: Finland

Best (safe) way to pull out ct60e

Post by tjam »

Hi,

compared to ct60, ct60e seems to sit quite tightly on falcon mobo because it snaps to falcon PSU connector. I'm afraid to use excessive force to pull it out and there's no really room to try loosen plastic PSU connector lip on falcon mobo underneath ct60e before pulling board off. I'm asking because it seems that I have defect 68882... Not a big deal, but I probably replace it for some 030 stuff.

EDIT: Managed to remove it :lol: comes off quite easily and is accessible with HDD bracket removed; just give some support for motherboard when lifting power connector.
Post Reply

Return to “CT60 / CT63 Area”