Not knowing anything about programming the system, it seems very complicated.
But I will still try.

Moderators: simonsunnyboy, Mug UK, Zorro 2, Moderator Team
rockyone wrote:04_10-2019
MI-3.PRG : http://www.mirari.fr/GuGa
Floppy disk 1440 Ko : http://www.mirari.fr/Uar6
Floppy disk 720 Ko : http://www.mirari.fr/iaAj
All files : http://www.mirari.fr/uAWC
DPF File in french : http://www.mirari.fr/5cGa
Tested on Steem v3.02 and Hatati 2.00 with the TOS FR 1.02, 1.04, 1.06,1.62, 2.05 and 512 Kb of RAM
Tested on Hatati 2.1.0 in STE mode with the TOS 1.62 FR, in mode MEGA STE with TOS 2.05 FR and 512 Kb of RAM
,
,
,
,
,
Art-Director color cycles are not converted to other formats.
Converting a maximum cycle of eight Neo or Degas colors to Art Director is supported.
MI-3 can load the files ".PL1" and .PL2 -on the original plane- and save them again.
You can also open or save a file by clicking on the left side of the screen
Do not confuse the extensions
ART of: Artistic Director, GFA-Artist, The ArtiST
PG1-3 of: Graphics Processor with PG0-2 from Paintwork, Anivision and Apaint that are not loaded.
"MI3" is entirely created on STEEM tos 1.62, and can work with 512 Kb of Ram on St Ste and also on Mega1 according to the information that ManuM returns to me.bjkock wrote: ↑Wed Oct 28, 2020 5:34 pm I can't get MI-3 to work together with Nvdi 5.03.
It works great without Nvdi, but with Nvdi it starts up and shows the help screen then freezes with no mouse pointer and no keyboard response, I have to reset the computer to get out of the program. This happens on both TOS 1.62 and TOS 2.06.
Is this a known issue or is it just on my set-up this happens?
I use an Atari STE 4MB with TOS 1.62 and TOS 2.06 and HD-Driver 10.18
Even the date