Can't get ACSI hard disk to work

A forum for anything about the Steem Engine STE emulator, comments, problems, bug reports etc. Steven Seagal regularly provides updated versions of the original STEem code. The current version is v3.9.4.

Moderators: Mug UK, Steem Authors, Moderator Team

Post Reply
Posts: 3
Joined: Fri Feb 12, 2016 9:33 am

Can't get ACSI hard disk to work

Post by Diefenbaker »

I created a 20mb hard disk image and configured Steem SSE 3.8.2 with Pasti to load the image, and this seems to work -- when I boot the machine in Steem, the hard drive is recognized at start up and appears to work ok. However, if I disable Pasti and configure the same hard drive image as an ACSI hard drive, it's not recognized by Steem. Should this work?

User avatar
Steven Seagal
Fuji Shaped Bastard
Fuji Shaped Bastard
Posts: 2018
Joined: Sun Dec 04, 2005 9:12 am
Location: Undisclosed

Re: Can't get ACSI hard disk to work

Post by Steven Seagal »

Welcome to the forum.

When I tested the feature it worked, probably sheer luck.

Please fill up a proper report here, that's the support section for Steem:
In the CIA we learned that ST ruled
Steem SSE:

Post Reply

Return to “Steem”