I just bought a TT030!

[frank.lukas]

I have Nova Adapter (new one with the Lightning Nova GAL and Hardware Mod) to sell.

Idek 2MB ATI option Ramcard /PN 109-26400-10
Frank 2MB ATI Option Ramcard / I must look at it
Ip 2MB ATI option Ramcard /PN 109-26400-10

I have also a MATRIX TC1208E Graphiccard and the Nova MACH64 is faster. With GEMBENCH 4.03 over 600% of the TT_MID speed ...

[lp]

I have Nova Adapter (new one with the Lightning Nova GAL and Hardware Mod) to sell.

Idek 2MB ATI option Ramcard /PN 109-26400-10
Frank 2MB ATI Option Ramcard / I must look at it

@ip ... can you look for the item number of your 2MB option card ?

I have also a MATRIX TC1208E Graphiccard and the Nova MACH64 is faster. With GEMBENCH 4.03 over 600% of the TT_MID speed ...

Snapshot I just took: (not for sale)

Mach64-ISA-card.jpg

[Rustynutt]

I just sold a very nice TT to a local user near me. Not sure if they are on the forum, this would be a great thread to follow as I'm sure they will be looking to do the same.

[frank.lukas]

The Ramboard from Ip is also a 109-26400-10

lp.jpg

[dhedberg]

I have Nova Adapter (new one with the Lightning Nova GAL and Hardware Mod) to sell.

Ouch, are you saying that I can't use the Lightning card with my setup? Can I patch my Nova adapter somehow to make it compatible with the Lightning card? Otherwise I'd most likely be interested in buying yours.

[dhedberg]

SCSI2SD works really well with TT along with HXC floppy emulator. I placed mine both in the HDD bay.

Where can I buy a SCSI2SD adapter that is known to work with the TT? Just anyone on e-bay or is there a more reliable source for them?

[dhedberg]

Aah. So it was you how outbid me. haha. Seems to be a great TT though.

Ops, sorry. Were you the bidder with the next highest bid? I put in a bid at about 6200 SEK with 10 seconds left and I was 100% sure I'd get it, but was shown a screen saying I wasn't the highest bidder and I panicked. Managed to get another bid in there with 2 seconds to go. Haha! You'll find yours eventually, and then you don't have to worry about me. One is enough!

I bought a battery from Conrad. Either buy a new holder or try to open the old one.

Cool. Will be one of the first things I replace.

New fan for the PSU is surely needed, if that haven't been replaced yet.

Great! Thanks for that. Is it known to fit and does it provide about the same airflow?

[frank.lukas]

I have Nova Adapter (new one with the Lightning Nova GAL and Hardware Mod) to sell.

Ouch, are you saying that I can't use the Lightning card with my setup? Can I patch my Nova adapter somehow to make it compatible with the Lightning card? Otherwise I'd most likely be interested in buying yours.

Use the Google Translator -> http://wiki.newtosworld.de/index.php?ti ... afikkarten

[dhedberg]

I have Nova Adapter (new one with the Lightning Nova GAL and Hardware Mod) to sell.

Ouch, are you saying that I can't use the Lightning card with my setup? Can I patch my Nova adapter somehow to make it compatible with the Lightning card? Otherwise I'd most likely be interested in buying yours.

Use the Google Translator -> http://wiki.newtosworld.de/index.php?ti ... afikkarten

Thanks! So, one question remains. Where can I buy the new Nova GAL (if anywhere)?
As it improves the timing for the MACH card regardless if a Lightning card is fitted or not I'd definitely be interested in one!

[frank.lukas]

The seller from the Lightning USB VME Card can send you a Nova GAL too ...

[derkom]

Great! Thanks for that. Is it known to fit and does it provide about the same airflow?

It fits. I had to install it with only three screws instead of four to get the top case to go on properly, but that may just be a quirk of my TT. In any case, three screws are enough.

I don't know what the relative airflows are, but the Noctua is certainly enough, especially if you switch from a spinny HDD to the SCSI2SD. And the volume level difference is great. I'm very glad with the swap.

[DoG]

Ops, sorry. Were you the bidder with the next highest bid? I put in a bid at about 6200 SEK with 10 seconds left and I was 100% sure I'd get it, but was shown a screen saying I wasn't the highest bidder and I panicked. Managed to get another bid in there with 2 seconds to go. Haha! You'll find yours eventually, and then you don't have to worry about me. One is enough!

No worries, I already got a TT. Sorry to drive the price up.

Great! Thanks for that. Is it known to fit and does it provide about the same airflow?

It's the exact same size. Check here. Same as for a MegSTe

Where can I buy a SCSI2SD adapter that is known to work with the TT? Just anyone on e-bay or is there a more reliable source for them?

AmigaKIT got them in stock. v6 doesn't seem to work apparently on Atari so I didn't dare to try that. v5.1 is a safe bet.

[dhedberg]

Ops, sorry. Were you the bidder with the next highest bid? I put in a bid at about 6200 SEK with 10 seconds left and I was 100% sure I'd get it, but was shown a screen saying I wasn't the highest bidder and I panicked. Managed to get another bid in there with 2 seconds to go. Haha! You'll find yours eventually, and then you don't have to worry about me. One is enough!

No worries, I already got a TT. Sorry to drive the price up.

No worries! Worth every penny!

Great! Thanks for that. Is it known to fit and does it provide about the same airflow?

It's the exact same size. Check here. Same as for a MegSTe

Ordered! Thank you!

Where can I buy a SCSI2SD adapter that is known to work with the TT? Just anyone on e-bay or is there a more reliable source for them?

AmigaKIT got them in stock. v6 doesn't seem to work apparently on Atari so I didn't dare to try that. v5.1 is a safe bet.

OK. Will have to think about it. Not decided yet whether I'll go with Storm+Thunder or if I'll stick with the original 16MB TT-RAM and go with an internal SCSI2SD adapter. I've ordered a CosmosEx for the TT, but have not yet received any confirmation. Without a CosmosEx I would most likely go with a complete Storm+Thunder+Lightning setup.

[derkom]

v6 doesn't seem to work apparently on Atari so I didn't dare to try that. v5.1 is a safe bet.

I am using a SCSI2SD V6 in my TT for about a month now with zero problems, with newest HDDRIVER.

I've even taken advantage of its USB Mass Storage feature to run a USB cable out the back of the TT and over to my Mac, where I mount a little 200 MB FAT partition which is mounted read-only on the TT. Works great for file transfer into the TT. I had to set things up in the SCSI2SD so that that partition is a secondary SCSI ID, tag it as removeable in HDDRIVER config, and use HDDRIVER to fake an "eject" when I want the TT to reload the directory (in MiNT, probably unnecessary in TOS), and it just works.

[DoG]

v6 doesn't seem to work apparently on Atari so I didn't dare to try that. v5.1 is a safe bet.

I am using a SCSI2SD V6 in my TT for about a month now with zero problems, with newest HDDRIVER.

I've even taken advantage of its USB Mass Storage feature to run a USB cable out the back of the TT and over to my Mac, where I mount a little 200 MB FAT partition which is mounted read-only on the TT. Works great for file transfer into the TT. I had to set things up in the SCSI2SD so that that partition is a secondary SCSI ID, tag it as removeable in HDDRIVER config, and use HDDRIVER to fake an "eject" when I want the TT to reload the directory (in MiNT, probably unnecessary in TOS), and it just works.

Good to know. I couldn't find any info on compability for v6 on Atari. Shared drives is a really nice feature.

[stormy]

SCSI2SD works really well with TT along with HXC floppy emulator. I placed mine both in the HDD bay.

Where can I buy a SCSI2SD adapter that is known to work with the TT? Just anyone on e-bay or is there a more reliable source for them?

I would recommend storm thunder and lightning. I have just sold my scsi2sd as I don't need it anymore.

[derkom]

Shared drives is a really nice feature.

This isn't really the way it's intended to be used, which is why I used a small extra partition for it, and mounted it read-only on the TT. No problems so far, but I figure the worst case scenario is I just have to wipe and recreate the one "disposable" partition.

The only way I was able to get MiNT to see directory changes was to set the SCSI ID associated with the extra partition as "removable" in HDDRIVER's config, and then use the eject function in the HDDRIVER config utility when I needed to simulate a medium change on the TT end. I'm sure there's a handier way to simulate the eject, with something more lightweight than the HDDRIVER utility, but so far this approach is working just fine, and makes transferring data into the TT much easier than before.

Note that the USB Mass Storage feature is available only on the V6 board.

[dhedberg]

Received the TT and it's in absolute mint condition. I'm shocked over how clean it is and how it's not yellowed at all. It's like a dream come true!
Will post pictures later if anyone would be interested, but will probably take a few days. Haven't looked inside of it yet, but will open it up during the weekend.

[susher]

[viking272]

So jealous - well done in a fine purchase!

[Bama]

Hooray !!

Yes, pics please.

[alienkidmj12]

Do you still have idek or lp 109-26400