14mb board (various docs, pinout, ctr14 gerber files)

Hardware, coding, music, graphic and various applications

Moderators: Mug UK, [ProToS], lp, moondog/.tSCc., Moderator Team

User avatar
djbase
Captain Atari
Captain Atari
Posts: 174
Joined: Tue Feb 05, 2008 1:05 am
Location: Made in Germany
Contact:

Re: 14mb board (various docs, pinout, ctr14 gerber files)

Post by djbase »

I could make some 14 MB boards (without simms) if we can get some buyers to hold the price low. I think 20-30 Euro is possible or even less.
HitPoint
Atari freak
Atari freak
Posts: 63
Joined: Mon Jun 05, 2006 10:41 pm
Location: St.Petersburg, Russia

Re: 14mb board (various docs, pinout, ctr14 gerber files)

Post by HitPoint »

WOW, im in! ;)
rian_ata
Captain Atari
Captain Atari
Posts: 269
Joined: Mon Apr 24, 2006 10:00 pm
Location: Netherlands
Contact:

Re: 14mb board (various docs, pinout, ctr14 gerber files)

Post by rian_ata »

I'm in too, can use 1 or 2 new ram boards. Hopefully these would be fast enough for Phantom or other bus accelarators! Nice site by the way Matthias.
User avatar
djbase
Captain Atari
Captain Atari
Posts: 174
Joined: Tue Feb 05, 2008 1:05 am
Location: Made in Germany
Contact:

Re: 14mb board (various docs, pinout, ctr14 gerber files)

Post by djbase »

I don't have a Phantom in my Falcon so I can not test or ensure this. I have a design already here so I will make a prototype for testing and will start making some cards. Due to christmas time it may take a bit longer so I guess the units will be ready in January next year if everything works how expected.
HitPoint
Atari freak
Atari freak
Posts: 63
Joined: Mon Jun 05, 2006 10:41 pm
Location: St.Petersburg, Russia

Re: 14mb board (various docs, pinout, ctr14 gerber files)

Post by HitPoint »

is this your design of ram board?
User avatar
djbase
Captain Atari
Captain Atari
Posts: 174
Joined: Tue Feb 05, 2008 1:05 am
Location: Made in Germany
Contact:

Re: 14mb board (various docs, pinout, ctr14 gerber files)

Post by djbase »

HitPoint wrote:is this your design of ram board?
Yes, its an own design but won't look much different to existing designs.
HitPoint
Atari freak
Atari freak
Posts: 63
Joined: Mon Jun 05, 2006 10:41 pm
Location: St.Petersburg, Russia

Re: 14mb board (various docs, pinout, ctr14 gerber files)

Post by HitPoint »

so, i hope its like Petr Svoboda`s design, simm socket faced to motherboard?
User avatar
djbase
Captain Atari
Captain Atari
Posts: 174
Joined: Tue Feb 05, 2008 1:05 am
Location: Made in Germany
Contact:

Re: 14mb board (various docs, pinout, ctr14 gerber files)

Post by djbase »

HitPoint wrote:so, i hope its like Petr Svoboda`s design, simm socket faced to motherboard?
I'm afraid not! I can't get the needed Simm sockets from my dealer so I have to use the angled one like on the CTR14.
User avatar
djbase
Captain Atari
Captain Atari
Posts: 174
Joined: Tue Feb 05, 2008 1:05 am
Location: Made in Germany
Contact:

Re: 14mb board (various docs, pinout, ctr14 gerber files)

Post by djbase »

Finally I finished my prototype and it works how expected. The only problem that I found is that not every Ram seems to work or maybe they are broken already.
atlantis.jpg
I will start buying all components next week and then will order the pcbs.
You do not have the required permissions to view the files attached to this post.
User avatar
Beetle
Atari maniac
Atari maniac
Posts: 79
Joined: Sat Jan 26, 2008 10:09 pm
Contact:

Re: 14mb board (various docs, pinout, ctr14 gerber files)

Post by Beetle »

That looks great, djbase!
What Atari do you want to modify today?
User avatar
DarkLord
Fuji Shaped Bastard
Fuji Shaped Bastard
Posts: 4462
Joined: Mon Aug 16, 2004 12:06 pm
Location: Prestonsburg, KY - USA
Contact:

Re: 14mb board (various docs, pinout, ctr14 gerber files)

Post by DarkLord »

Late in the thread, so sorry if rehashing....

Current project, for all STs? How much and how long? Thanks! :)
Welcome To DarkForce! http://www.darkforce.org "The Fuji Lives.!"
Atari SW/HW based BBS - Telnet:darkforce-bbs.dyndns.org 520
User avatar
djbase
Captain Atari
Captain Atari
Posts: 174
Joined: Tue Feb 05, 2008 1:05 am
Location: Made in Germany
Contact:

Re: 14mb board (various docs, pinout, ctr14 gerber files)

Post by djbase »

DarkLord wrote:Late in the thread, so sorry if rehashing....

Current project, for all STs? How much and how long? Thanks! :)
This board is only for the Falcon as the ST does not have the expansion slot.
User avatar
DarkLord
Fuji Shaped Bastard
Fuji Shaped Bastard
Posts: 4462
Joined: Mon Aug 16, 2004 12:06 pm
Location: Prestonsburg, KY - USA
Contact:

Re: 14mb board (various docs, pinout, ctr14 gerber files)

Post by DarkLord »

djbase wrote:This board is only for the Falcon as the ST does not have the expansion slot.
My bad - I didn't even look at the <blaringly obvious picture>... :)

Thanks.
Welcome To DarkForce! http://www.darkforce.org "The Fuji Lives.!"
Atari SW/HW based BBS - Telnet:darkforce-bbs.dyndns.org 520
[ProToS]
Moderator
Moderator
Posts: 2242
Joined: Fri Sep 20, 2002 2:09 am
Location: Lourdes / France
Contact:

Re: 14mb board (various docs, pinout, ctr14 gerber files)

Post by [ProToS] »

DarkLord wrote: My bad - I didn't even look at the <blaringly obvious picture>... :)
Thanks.
it's a F030 only topic :wink: no need to see the picture :D

djbase : nice work
SeeU
[ProToS]/Facebook
User avatar
djbase
Captain Atari
Captain Atari
Posts: 174
Joined: Tue Feb 05, 2008 1:05 am
Location: Made in Germany
Contact:

Re: 14mb board (various docs, pinout, ctr14 gerber files)

Post by djbase »

It will take 2-3 weeks to get all the stuff. Price target was 20 Euro and you will be able to pay by PayPal. Details will follow as soon as everything is ready.

If you need help with your flash tos board I may help.
User avatar
Mark_G
Atari Super Hero
Atari Super Hero
Posts: 531
Joined: Sun Feb 05, 2006 11:55 am
Location: Belgium

Re: 14mb board (various docs, pinout, ctr14 gerber files)

Post by Mark_G »

Hello,

Can you place the sim underneath the board. Such a way the shield can be replaced.

Look at http://www.volny.cz/boban07/RAM_kartice/

Mark
User avatar
djbase
Captain Atari
Captain Atari
Posts: 174
Joined: Tue Feb 05, 2008 1:05 am
Location: Made in Germany
Contact:

Re: 14mb board (various docs, pinout, ctr14 gerber files)

Post by djbase »

No, sorry, the design will be as shown on the picture above. You will have to remove the shield or cut out a small window.
HitPoint
Atari freak
Atari freak
Posts: 63
Joined: Mon Jun 05, 2006 10:41 pm
Location: St.Petersburg, Russia

Re: 14mb board (various docs, pinout, ctr14 gerber files)

Post by HitPoint »

alright, its nice to see that project still alive. let us now then you finished buying components
Faler
Atarian
Atarian
Posts: 5
Joined: Sun Jul 20, 2008 6:39 pm

Re: 14mb board (various docs, pinout, ctr14 gerber files)

Post by Faler »

I am also interested in the ram expansion board.

My Falcon only has 4mb ram, and that is just not enough.
User avatar
djbase
Captain Atari
Captain Atari
Posts: 174
Joined: Tue Feb 05, 2008 1:05 am
Location: Made in Germany
Contact:

Re: 14mb board (various docs, pinout, ctr14 gerber files)

Post by djbase »

I am currently assembling and testing the boards so I think we can start next week.

Price would be 15 Euro.
Shipping is 3 Euro within Europe, 6 Euro worldwide for airmail.
Add 3 Euro extra for registered airmail.
DSC00501.jpg
You do not have the required permissions to view the files attached to this post.
User avatar
coze
Captain Atari
Captain Atari
Posts: 189
Joined: Thu Oct 16, 2008 4:10 am
Location: Tokyo
Contact:

Re: 14mb board (various docs, pinout, ctr14 gerber files)

Post by coze »

looks great :) I'm interested in two, pm sent already :)
User avatar
wthorbjo
Atari freak
Atari freak
Posts: 71
Joined: Thu Jun 26, 2008 5:02 am

Re: 14mb board (various docs, pinout, ctr14 gerber files)

Post by wthorbjo »

Awesome job! I want one; PM sent!
wthorbjo
Edmonton, AB, Canada
Falcon030/CT63, 1040STE, etc...
Faler
Atarian
Atarian
Posts: 5
Joined: Sun Jul 20, 2008 6:39 pm

Re: 14mb board (various docs, pinout, ctr14 gerber files)

Post by Faler »

Nice work!

i also sent a pm.

Now i am also on my way to owning a nice upgraded Falcon!
I only have to wait for the FPU and atari-vga converter i ordered yesterday...
User avatar
djbase
Captain Atari
Captain Atari
Posts: 174
Joined: Tue Feb 05, 2008 1:05 am
Location: Made in Germany
Contact:

Re: 14mb board (various docs, pinout, ctr14 gerber files)

Post by djbase »

All boards have successful passed the test field and are now ready for take off. So anyone who wants a card please drop me a PM. Thanks.
Faler
Atarian
Atarian
Posts: 5
Joined: Sun Jul 20, 2008 6:39 pm

Re: 14mb board (various docs, pinout, ctr14 gerber files)

Post by Faler »

Hey all,

I just received my 14mb board from djbase.

It looks wonderful, now i only have to scavenge a simm from some computer with many years of proven technology...

Justin
Post Reply

Return to “Professionals”