PAK68/2 PCB Project ...

[frank.lukas]

The Board has a MC68020/16Mhz CPU and a FPU that can run faster and a 32-bit TOS 2.06 on it. The Speed is at the speed from a Atari Falcon. It works with any Atari ST but with a 1040ST or 260/520ST it will not fit in the original Case ...

pak_2.gif

If you interested send me a PM.

[Shockwav3]

There is a thread here at AF. I think it's called "RePak" or something like that.

I don't believe it's had much activity in quite a while...

I might pick that project up again at a later time - otherwise: The full schematics were printed in the c't magazine and the article can be bought online. High quality scans are available ... so everything I had when I started the reverse engineering.
I'm currently in the prototyping phase of another project (with the series run being done some time this year if all goes well) - so 2018 ... maybe as I still have the old layouts that remained untouched since december 2013.
http://i.imgur.com/4bSOIAa.jpg

[matej]

Is pak68/2 fully assembled available?

[frank.lukas]

no

[frank.lukas]

I have already 5 PCBs left. Price incl. postage worldwide is 17,- Euro. It came with a CD-R with Docu and Schematics and all Files needed.

platinen_klein.jpg

[piotrk]

@frank.lukas

Do you have PCB or completed PAK68/3 for Mega STE ?

[frank.lukas]

no

[shonyatrix]

Declaring interest 1pc of board, plese PM me.

[lucaseverini]

Hello!
If there is one left, I'd like to buy it.
Please let me know by PM or at [ATARI-FORUM_USERNAME]@gmail.com...
Thank you!

[frank.lukas]

No PCBs left over, sorry ...