TOS-card AT-BUS

artik-wroc · Post by **artik-wroc** » Wed Apr 15, 2009 8:21 am

Does anyone have assembly instructions for the TOS-card shown in the picture below?

Nyh · Post by **Nyh** » Wed Apr 15, 2009 10:48 am

artik-wroc wrote:Does anyone have assembly instructions for the TOS-card shown in the picture below?

Remove 68000 from motherboard.
Place a socket at the position of the 68000
Insert card into socket.
Place 68000 at the IC10 position of the card.
Done!

Hans Wessels

artik-wroc · Post by **artik-wroc** » Wed Apr 15, 2009 11:14 am

Nyh wrote:Done!

Not done!
Where to connect the wires to the connectors ST2?
The device allows you to switch between versions of TOS.

Nikolas · Post by **Nikolas** » Wed Apr 15, 2009 5:42 pm

Once i have like this at bus card with tos 2.06.
There are 2 main wires that connect to pin 10 acsi(i quess), thats for ide on at bus card
And second wire you need to connect to one of eprom, so you can swich to (your original tos on mainboard) and tos 2.06

artik-wroc · Post by **artik-wroc** » Thu Apr 16, 2009 7:51 am

Thanks
I found it:
http://forum.atari-home.de/index.php?topic=4608.0

Atari-Forum

TOS-card AT-BUS

TOS-card AT-BUS

Re: TOS-card AT-BUS

Re: TOS-card AT-BUS

Re: TOS-card AT-BUS

Re: TOS-card AT-BUS