Local Sellers for MiSTer Expansion Boards
Moderators: Mug UK, Zorro 2, spiny, Greenious, Sorgelig, Moderator Team
Re: Local Sellers for MiSTer Expansion Boards
Update of my prices
SD Board XS 1.1 (Alliance ram stable 167mhz): $25.00 USD
SD Board XS 1.1 (Winbond ram stable 150-167mhz) $20.00 USD
IO Board XL 5.5: $40.00 USD
7 port Mister USB Hub: $35.00 USD
Y-power Cable for USB: $2.00 USD
4xStandoff for USB Hub $2.00 USD
RTC: $12.00 USD
Heatsink $2.00 USD
Shipping $6.00 USD (USA)
Will ship internationally, shipping/handling and VAT costs based on location and address
Payment can be done using Paypal.
PayPal: UnrealCpu@aol.com
Check Post for further information: viewtopic.php?f=117&t=33613&start=275#p362302
Tons of quantity available.
Have one left of the IO board available in older version that is smaller than XL IO , for $35.00+shipping
SD Board XS 1.1 (Alliance ram stable 167mhz): $25.00 USD
SD Board XS 1.1 (Winbond ram stable 150-167mhz) $20.00 USD
IO Board XL 5.5: $40.00 USD
7 port Mister USB Hub: $35.00 USD
Y-power Cable for USB: $2.00 USD
4xStandoff for USB Hub $2.00 USD
RTC: $12.00 USD
Heatsink $2.00 USD
Shipping $6.00 USD (USA)
Will ship internationally, shipping/handling and VAT costs based on location and address
Payment can be done using Paypal.
PayPal: UnrealCpu@aol.com
Check Post for further information: viewtopic.php?f=117&t=33613&start=275#p362302
Tons of quantity available.
Have one left of the IO board available in older version that is smaller than XL IO , for $35.00+shipping
Re: Local Sellers for MiSTer Expansion Boards
Hi there, I'm in Toronto, Canada and I have about 8 SDRAM v3.1u boards soldered up and ready to go.
I haven't put pins on them yet so if you want one you can let me know which orientation you'd like. The first two boards I soldered have been tested using the memtest core for over 2 hours at 167Mhz with 0 errors. I will test each board after installing pins to make sure they are good.
Also, if you want some other boards you can hit me up I don't mind ordering them and soldering if there is demand.
Please PM me if you're interested. Thanks.
I haven't put pins on them yet so if you want one you can let me know which orientation you'd like. The first two boards I soldered have been tested using the memtest core for over 2 hours at 167Mhz with 0 errors. I will test each board after installing pins to make sure they are good.
Also, if you want some other boards you can hit me up I don't mind ordering them and soldering if there is demand.
Please PM me if you're interested. Thanks.
Re: Local Sellers for MiSTer Expansion Boards
Hi all - I received a damaged DE-10 board from Digikey -- the micro USB port doesn't seem to work. They sent me a new one and don't want the old one back. I have no use for it, so if someone wants to pay shipping and can make use of it, it's yours free + shipping. It's the whole kit in box with a damaged micro USB. It does boot MiSTer fine though. I'm in the US; PM me if interested. Thanks!
...and it's gone. thanks!
...and it's gone. thanks!
Re: Local Sellers for MiSTer Expansion Boards
Hey Guys,
final stock update, these are my last boards all ready to go:
2x IO-Board v.5.5 with Noctua Fan + Heatsink (with thermal tape): 50€
5x SD-RAM XS v.1.1: 15€
3x RTC v.1.3: 10€
Please look at the 1st Post for all other information like shipping etc. Please keep in mind that I'm sending from germany
Pics:
https://imgur.com/a/Zr4WMIG
Thanks!
Kevin
final stock update, these are my last boards all ready to go:
2x IO-Board v.5.5 with Noctua Fan + Heatsink (with thermal tape): 50€
5x SD-RAM XS v.1.1: 15€
3x RTC v.1.3: 10€
Please look at the 1st Post for all other information like shipping etc. Please keep in mind that I'm sending from germany

Pics:
https://imgur.com/a/Zr4WMIG
Thanks!
Kevin
Re: Local Sellers for MiSTer Expansion Boards
Hi,
This is a message for people in France.
Je vends des cartes SDRAM XS 1.1 avec chip Alliance pour 25Euros port compris en lettre suivie.
Contact renet.f@gmail.com ou PM.
This is a message for people in France.
Je vends des cartes SDRAM XS 1.1 avec chip Alliance pour 25Euros port compris en lettre suivie.
Contact renet.f@gmail.com ou PM.
-
- Atarian
- Posts: 3
- Joined: Fri Oct 19, 2018 3:35 am
Re: Local Sellers for MiSTer Expansion Boards
Looking for an USB board, preferably v1.2, and obviously an LLCoolJoy.
Located in the UK, if anyone has any available please let me know...

- BitsNStuff
- Obsessive compulsive Atari behavior
- Posts: 122
- Joined: Tue Oct 16, 2018 7:55 am
- Contact:
Re: Local Sellers for MiSTer Expansion Boards
The LLCoolJoy is still a work in progress so you'll have to hold on for that one.
-
- Atari User
- Posts: 37
- Joined: Thu Oct 04, 2018 3:55 am
Re: Local Sellers for MiSTer Expansion Boards
I have USB Hub v1.1 in stock on my site: https://misteraddons.com and ship internationally.LooneyBinJim wrote:Looking for an USB board, preferably v1.2, and obviously an LLCoolJoy.Located in the UK, if anyone has any available please let me know...
I also have in stock:
IO Board 5.5 XL
SDRAM XS
3D Printed Main Case
3D Printed USB Cases
Pre-formatted micro SD cards
Customizable MiSTer bundles
Acrylic fan boards and bottom plates (exclusive product)
Currently restocking:
VGA to SCART cables
Re: Local Sellers for MiSTer Expansion Boards
Ready to ship tomorrow
Joined: Tue Oct 30, 2018 2:05 am
Re: Local Sellers for MiSTer Expansion Boards
Postby Unrealcpu » Tue Jan 22, 2019 9:40 am
Update of my prices
SD Board XS 1.1 (Alliance ram stable 167mhz): $25.00 USD
SD Board XS 1.1 (Winbond ram stable 150-167mhz) $20.00 USD
IO Board XL 5.5: $40.00 USD
7 port Mister USB Hub: $35.00 USD
Y-power Cable for USB: $2.00 USD
4xStandoff for USB Hub $2.00 USD
RTC: $12.00 USD
Heatsink $2.00 USD
Shipping $6.00 USD (USA)
Will ship internationally, shipping/handling and VAT costs based on location and address
Payment can be done using Paypal.
PayPal: UnrealCpu@aol.com
Check Post for further information: viewtopic.php?f=117&t=33613&start=275#p362302
Tons of quantity available.
Have one left of the IO board available in older version that is smaller than XL IO , for $35.00+shipping
Joined: Tue Oct 30, 2018 2:05 am
Re: Local Sellers for MiSTer Expansion Boards
Postby Unrealcpu » Tue Jan 22, 2019 9:40 am
Update of my prices
SD Board XS 1.1 (Alliance ram stable 167mhz): $25.00 USD
SD Board XS 1.1 (Winbond ram stable 150-167mhz) $20.00 USD
IO Board XL 5.5: $40.00 USD
7 port Mister USB Hub: $35.00 USD
Y-power Cable for USB: $2.00 USD
4xStandoff for USB Hub $2.00 USD
RTC: $12.00 USD
Heatsink $2.00 USD
Shipping $6.00 USD (USA)
Will ship internationally, shipping/handling and VAT costs based on location and address
Payment can be done using Paypal.
PayPal: UnrealCpu@aol.com
Check Post for further information: viewtopic.php?f=117&t=33613&start=275#p362302
Tons of quantity available.
Have one left of the IO board available in older version that is smaller than XL IO , for $35.00+shipping
Re: Local Sellers for MiSTer Expansion Boards
Added new stock...
http://www.atari-forum.com/viewtopic.ph ... 87#p344187
http://www.atari-forum.com/viewtopic.ph ... 87#p344187
MiSTer Expansion Boards: http://www.atari-forum.com/viewtopic.ph ... 92#p344187
Re: Local Sellers for MiSTer Expansion Boards
SD Ram board special
Alliance- 17.99+7.99 shipping
Winbond - 15.00+7.99
Alliance- 17.99+7.99 shipping
Winbond - 15.00+7.99
Re: Local Sellers for MiSTer Expansion Boards
is anyone selling cables that connect to the remote button and light connectors on the I/O board?
Last edited by warham on Mon Feb 11, 2019 9:15 am, edited 1 time in total.
Re: Local Sellers for MiSTer Expansion Boards
This is case dependent. So it's supposed to be "do it yourself".warham wrote:is anyone selling cables that connect to the remote button and light connections?
Re: Local Sellers for MiSTer Expansion Boards
Try googling for ""jumper female wire connector". You can cut one end to solder them into any buttons.warham wrote:is anyone selling cables that connect to the remote button and light connectors on the I/O board?
-
- Atari freak
- Posts: 51
- Joined: Sun Dec 09, 2018 6:53 pm
Re: Local Sellers for MiSTer Expansion Boards
https://www.aliexpress.com/item/10pcs-l ... 33194.htmlwarham wrote:is anyone selling cables that connect to the remote button and light connectors on the I/O board?
I ordered these. It's taking a long time to get to me, but I think they'll work well.
-
- Atarian
- Posts: 3
- Joined: Fri Oct 19, 2018 3:35 am
Re: Local Sellers for MiSTer Expansion Boards
AliExpress? Usually only takes under 2 weeks to the U.K.Hewhoisred wrote:https://www.aliexpress.com/item/10pcs-l ... 33194.htmlwarham wrote:is anyone selling cables that connect to the remote button and light connectors on the I/O board?
I ordered these. It's taking a long time to get to me, but I think they'll work well.
-
- Atari User
- Posts: 37
- Joined: Thu Oct 04, 2018 3:55 am
Re: Local Sellers for MiSTer Expansion Boards
Just updated my site to include a fully customizable MiSTer bundle configurator, and a case configurator.
Bundles include DE10-nano, and SDRAM, with options for: upgradable micro SD cards, IO Boards v5.5 XL, USB Hubs, acrylic fan plates, acrylic bottom plates, and VGA to SCART/YPbPr/VGA cables. Some pieces may be backordered but all parts are being assembled 5 or 6 days per week.
Case pieces can now be purchase individually in case you want to freshen up your current look. Colors include: Transparent, White, Gray, Dark Gray, Black, Glow in the Dark, Purple, Orange, Famicom Red, Red, Teal, Blue, Green, and Yellow. 3D printing is going on nearly 24/7. Expect a few day wait as demand ebbs and flows.
https://misteraddons.com
Bundles include DE10-nano, and SDRAM, with options for: upgradable micro SD cards, IO Boards v5.5 XL, USB Hubs, acrylic fan plates, acrylic bottom plates, and VGA to SCART/YPbPr/VGA cables. Some pieces may be backordered but all parts are being assembled 5 or 6 days per week.
Case pieces can now be purchase individually in case you want to freshen up your current look. Colors include: Transparent, White, Gray, Dark Gray, Black, Glow in the Dark, Purple, Orange, Famicom Red, Red, Teal, Blue, Green, and Yellow. 3D printing is going on nearly 24/7. Expect a few day wait as demand ebbs and flows.
https://misteraddons.com
Re: Local Sellers for MiSTer Expansion Boards
I am now completely out of Super Expansion Boards. I do have some XS SDRAM boards and RTC board in stock. I also have fans for the v5.x I/O boards, and I will be adding the custom heat sink I had made (24.5mm x 24.5mm). I will be offering a case shortly, printed using SLS printers at 35um resolution.
https://www.cbmstuff.com/search.php?pg=1&stext=mister
https://www.cbmstuff.com/search.php?pg=1&stext=mister
I am the flux ninja
-
- Obsessive compulsive Atari behavior
- Posts: 133
- Joined: Wed Aug 03, 2005 11:45 am
- Location: Ohio, USA
Re: Local Sellers for MiSTer Expansion Boards
Stock update:
USB Hub (1.1) now available!
Includes a removable signal cable, power "Y" cable, and standoffs.
Power jack can be located on the long or short side of the board (please specify)
I was able to get parts in larger quantity (=lower cost), so new reduced prices!
All in stock ready to ship as of 18-Feb
First class parcel: $5
Priority Mail w/tracking: $8
email orders@legacypixels.com to order.
See topic or website in my signature for more info.
Thanks!
-Ken
USB Hub (1.1) now available!
Includes a removable signal cable, power "Y" cable, and standoffs.
Power jack can be located on the long or short side of the board (please specify)
I was able to get parts in larger quantity (=lower cost), so new reduced prices!
All in stock ready to ship as of 18-Feb
- * SDRAM XS v1.1 or Universal v3.1 ... $20
* I/O Board v5.5 (All headers fully populated, heatsink, fan & printed support brackets) ... $30
* RTC v1.3 w/battery and printed supports ... $15
* USB Hub v1.1 w/standoffs, removable IO cable, and power Y cable ... $30
(specify location of power jack, short or long side)
First class parcel: $5
Priority Mail w/tracking: $8
email orders@legacypixels.com to order.
See topic or website in my signature for more info.
Thanks!
-Ken
Last edited by Poobah on Fri Feb 22, 2019 5:45 am, edited 1 time in total.
US based seller MiSTer Expansion Boards and Atari items
https://www.legacypixels.com/
https://www.legacypixels.com/
Re: Local Sellers for MiSTer Expansion Boards
Hi,
Im in the UK and looking to purchase prebuilt:
IO-Board v.5.5 with Fan + Heatsink
SD-RAM board
VGA to Scart Cable - ideally one that will work with GroovyMame too
Please msg me if you have any of the above and are a UK seller.
Thanks a lot.
Iratash.
Im in the UK and looking to purchase prebuilt:
IO-Board v.5.5 with Fan + Heatsink
SD-RAM board
VGA to Scart Cable - ideally one that will work with GroovyMame too
Please msg me if you have any of the above and are a UK seller.
Thanks a lot.
Iratash.
Re: Local Sellers for MiSTer Expansion Boards
hi all ,
i'm in France and looking for a memory and an IO board,
please msg if available.
thanks in advance.
Stef
i'm in France and looking for a memory and an IO board,
please msg if available.
thanks in advance.
Stef
Re: Local Sellers for MiSTer Expansion Boards
Hi,
Living in Italy and looking for an USB hub board.
Please message me if you've got any to sell.
Thanks!
Living in Italy and looking for an USB hub board.
Please message me if you've got any to sell.
Thanks!
Re: Local Sellers for MiSTer Expansion Boards
SDRAM XS v1.1 $18 USD free shipping from Hong Kong
http://www.tototek.com/store/index.php? ... cts_id=222
http://www.tototek.com/store/index.php? ... cts_id=222
Re: Local Sellers for MiSTer Expansion Boards
And again: Added new stock:
http://www.atari-forum.com/viewtopic.ph ... 87#p344187
http://www.atari-forum.com/viewtopic.ph ... 87#p344187
MiSTer Expansion Boards: http://www.atari-forum.com/viewtopic.ph ... 92#p344187