alanswx wrote: kublai wrote: alanswx wrote:
I believe sometimes the error message disappears before the video works on the core.
If you ssh into your mister
Code: Select all
ps ax | grep MiSTer
kill <pid from the ps command>
And you should get a lot of debug output.
Or hook up the usb cable and run a serial terminal to see the output.
I ssh to my Mister and there are alot of output. Is there something in particular I need to look at?
When you run the mra file from the menu look for missing rbf or file not found on the rom zip.
Missing file sb-9.mll for 1942. I confirm that I have 1942.zip
Below is output.
INFO: Video resolution: 256 x 224, fHorz = 15.6KHz, fVert = 59.6Hz, fPix = 6.00MHz
INFO: Frame time (100MHz counter): VGA = 1676799, HDMI = 1676798
FileOpenEx(open) File:/media/fat/config/A.1942_gamma.cfg, error: No such file or directory.
FileOpenEx(open) File:/media/fat/config/A.1942_scaler.cfg, error: No such file or directory.
Send HDMI parameters:
video: 1920(1920), 88(88), 44(44), 148(148), 1080(1080), 4(4), 5(5), 36(36), Calculate PLL for 147.6027 MHz:
Fvco=442.807993, C=3, M=8, K=0.856160(3677178606) -> Fpix=147.602664