F030 - No drives found even if device detected

News, questions and bugs reports about CosmosEx by Jookie. Now we have a Raspberry Pi in our machines!

Moderators: Jookie, Moderator Team

Post Reply
User avatar
whiskey
Atariator
Atariator
Posts: 21
Joined: Sun Mar 04, 2018 11:36 pm

F030 - No drives found even if device detected

Post by whiskey »

I finally managed to connect my cosmo to my falcon via a SCSI enclosure (took my a year to get hold of a suitable cable/enclosure combo). HDDriver detects both SD and CE_DD devices on the SCSI bus, but there is no drive shown/detected, even though the SD card was formated/partitioned and is fully operational on a MegaST (in ACSI mode, of course). I've tried changing the IDs for both SD and CE_DD to different values to no avail, results identical.
The drives on the internal IDE HDD are of course detected by HDDriver and fully operational.
Any ideas? What am I missing/doing wrong?
falcon_cosmo_hddriver_resize.jpg
You do not have the required permissions to view the files attached to this post.
User avatar
nanard
Obsessive compulsive Atari behavior
Obsessive compulsive Atari behavior
Posts: 141
Joined: Mon Apr 04, 2016 2:11 pm

Re: F030 - No drives found even if device detected

Post by nanard »

and are you seeing translated drives when CEDD driver is loaded ?
4MB STE + CosmosEx /|\ MegaST4 + MegaFile 44 /|\ Stacy 4
User avatar
whiskey
Atariator
Atariator
Posts: 21
Joined: Sun Mar 04, 2018 11:36 pm

Re: F030 - No drives found even if device detected

Post by whiskey »

nanard wrote:and are you seeing translated drives when CEDD driver is loaded ?
bought an external SCSI enclosure with built-in power supply (instead of the 0.75A mobile phone charger I used before) and voila, works like a charm :cheers:
Got my internal IDE/CF, SD in cosmo and a network drive on my NAS via cosmo all working at the same time, reading & writing happily. I'm now getting worried about running out of drive letters in TOS :lol:
User avatar
dhedberg
Atari God
Atari God
Posts: 1205
Joined: Mon Aug 30, 2010 8:36 am
Contact:

Re: F030 - No drives found even if device detected

Post by dhedberg »

Yes, the CosmosEx with the RPi requires more juice than 0.75A. I initially tried using a 1A power supply but even that wasn't enough. 1.6A did the trick.
Daniel, New Beat - http://newbeat.atari.org.
Like demos? Have a look at our new Falcon030 demo It's that time of the year again, or click here to feel the JOY.
User avatar
Bikerbob
Captain Atari
Captain Atari
Posts: 403
Joined: Wed Mar 23, 2016 2:46 am
Location: Oakville, ON, Canada
Contact:

Re: F030 - No drives found even if device detected

Post by Bikerbob »

Agreed. I use a 2A USB charging adaptor, to the usb input and working great.
Post Reply

Return to “CosmosEx”