ive got a rpi model b (original release with 26 pin GPIO, no mounting holes) this does not fit in the case but will boot up with the supplied SD card.
has following issues;
1.config only recognises solo device
2.slow on network over html (chrome)
3.keyboard injector intermitent
4.floppy upload doesnt work
5.doesn't recognise usb devices
suspect 4 and 5 due to 1.
with my rpi2 the supplied sd image does not boot at all.
should either of those work or do I need a different rpi? i cant find the version shown in the video (2 mounting holes, seperate comp vid output connector). the case seems designed for a B+ or rpi2 (4 mounting holes). do i need a B+?
which rpi?
Moderators: Jookie, Moderator Team
Re: which rpi?
Asked Jookie the same a while back - the CosmosEx v2 is prepared for the B+. The B would need a different internal cable to work. Your CosmosEx probably can't see the CE with the B+ connector cable. The Pi 2 isn't supported.
So it's probably best to get a B+. Worth it, I think.
So it's probably best to get a B+. Worth it, I think.
Re: which rpi?
cheers, i've ordered a b+ seem to be throwing money at this damn thing all to play a few old games lol
-
Jookie
- Hardware Guru
- Posts: 1252
- Joined: Wed Feb 04, 2004 6:54 pm
- Location: Kosice, Slovakia
- Contact:
Re: which rpi?
This version of RPi without mounting holes was never supported, it has different GPIO pins on that connector.grobda wrote:ive got a rpi model b (original release with 26 pin GPIO, no mounting holes) this does not fit in the case but will boot up with the supplied SD card.
