Search found 124 matches

by yungjoon
Thu Sep 16, 2010 6:52 am
Forum: CT60 / CT63 Area
Topic: Falcon CT63 and disk access problem
Replies: 47
Views: 6344

Re: Falcon CT63 and disk access problem

OK, Thanks for your assitance, Dr Simbo and Dr Wongck. Yesterday, I disconnected the power cable between CT board - motherboard and replaced it directly by the 2th floppy cable from PSU, now the CT board is directly powered by the PSU. It seems that the freeze at boot has disappeared, It boots corre...
by yungjoon
Tue Sep 14, 2010 4:50 pm
Forum: CT60 / CT63 Area
Topic: Falcon CT63 and disk access problem
Replies: 47
Views: 6344

Re: Falcon CT63 and disk access problem

I am already in this mode. I can't reach 800x600 mode ...

Would it be a CT60 config problem ?

My settings are:

>Boot page:

Boot ide0-1->scsi0-7 OS:TOS
scsi arbitration: yes ID:1
Delai: 2s Blitter:fast
Tos in ram:no Tos:normal
boot.log:yes
by yungjoon
Tue Sep 14, 2010 7:17 am
Forum: CT60 / CT63 Area
Topic: Falcon CT63 and disk access problem
Replies: 47
Views: 6344

Re: Falcon CT63 and disk access problem

I didn't know that both CT63 and motherboard must be powered. Rodolphe Czuba didn't advise me to do that when he saw my falcon/CT63 config ... I have the original falcon psu but it can not be fitted with the CT board. The pc psu has no compatible connectors. And 20A, it is enormous ! Are you sure ? ...
by yungjoon
Mon Sep 13, 2010 2:43 pm
Forum: CT60 / CT63 Area
Topic: Falcon CT63 and disk access problem
Replies: 47
Views: 6344

Re: Falcon CT63 and disk access problem

ok, don't laugh, I am a newbie, here you are ...

I think there is no scsi clock patch.
by yungjoon
Mon Sep 13, 2010 11:07 am
Forum: CT60 / CT63 Area
Topic: Falcon CT63 and disk access problem
Replies: 47
Views: 6344

Re: Falcon CT63 and disk access problem

Here is my CT63.
by yungjoon
Sun Sep 12, 2010 7:02 pm
Forum: CT60 / CT63 Area
Topic: Falcon CT63 and disk access problem
Replies: 47
Views: 6344

Re: Falcon CT63 and disk access problem

Thanks for your replies. I run my falcon under 640x480 mode, it is connected to a standard lcd monitor. The TOS version is 4.04, not copied to ram, and I installed hddrver 7.93 (last cubase audio compatible version). I fitted a mini ITX power supply but I didn't fit any clock buffer. What is it ? Wh...
by yungjoon
Sun Sep 12, 2010 3:51 pm
Forum: CT60 / CT63 Area
Topic: Falcon CT63 and disk access problem
Replies: 47
Views: 6344

Falcon CT63 and disk access problem

Hi, I met some problems with my config. (falcon CT63, hddriver 7.93, 6 Go ide "system" drive, 6 Go external scsi drive, ZIP250 scsi): - When I power up the falcon, the system freezes before loading desktop, I need to do a reset to reboot correctly, strange ... - Same problem occurs when booting with...
by yungjoon
Sat Sep 04, 2010 1:06 pm
Forum: Professionals
Topic: Atari tt floppy replacement
Replies: 3
Views: 808

Atari tt floppy replacement

Hi all,

Today I tried to format or write data on a floppy discs and I got errors (can't write, can't format). I tested DD/HD discs with no success.

Can I directly use a standard pc floppy disk to replace the old one ?

Thanks,

yungjoon
by yungjoon
Mon Jul 19, 2010 9:37 am
Forum: For sale / Wanted
Topic: Atari TT
Replies: 0
Views: 633

Atari TT

For midi purpose I moved to mac, I don't use my TT anymore. Here is the configuration:

- Atari TT/030 with 4 Mo (st-ram) + 16 Mo (TT-ram)
- midex+ (4 midi out / 2 midi in)
- internal 4Go scsi disk
- ps2 mouse adapter

200€.

I am located in France, shipping inside E.U. preferred ...
by yungjoon
Sun Mar 21, 2010 6:48 pm
Forum: Professionals
Topic: file copy problem with falcon
Replies: 3
Views: 689

Re: file copy problem with falcon

ok, thanks for your replies.

I will rather try direct transfert (parallel port) or bigger media like jaz disk.

ps: my pseudo is my former first name, Yung Joon. I was born in Korea but moved to France 30 years ago. If you know someone who is called Yung Joon KIM, let me know !
by yungjoon
Sat Mar 20, 2010 5:30 pm
Forum: Professionals
Topic: file copy problem with falcon
Replies: 3
Views: 689

file copy problem with falcon

Hi, I met a problem when copying a lot of files/directories (ex: 6000 files/300 directories) from a scsi hard disk to a zip disk. The zip is partitionned with tos/windows compatibility using hddriver, I need to transfer files on a pc. Randomly, the copy freeze or generate error like "not enough spac...
by yungjoon
Sat Mar 20, 2010 3:18 pm
Forum: MIDI Software and Hardware
Topic: how do i install midex driver into cubase
Replies: 27
Views: 16512

Re: how do i install midex driver into cubase

I never got it work with my falcon, even with the midexfal.drv.

With my TT, I managed to configure a cubase 3 with a midex+ and a MO4. There was only a 8 midi ports limitation I didn't really understand (should have 9 ports with TT native port).
by yungjoon
Sat Mar 20, 2010 10:43 am
Forum: MIDI Software and Hardware
Topic: how do i install midex driver into cubase
Replies: 27
Views: 16512

Re: how do i install midex driver into cubase

Hi,

I joined smp2.drv and midex114.drv.

About midex driver, carefull: "midex114" is for ST/STe, "midexfal" is for Falcon 030 (not ct60) and "midextt" is for TT.

Hope this will help you.
by yungjoon
Fri Mar 19, 2010 1:11 pm
Forum: MIDI Software and Hardware
Topic: how do i install midex driver into cubase
Replies: 27
Views: 16512

Re: how do i install midex driver into cubase

Hi,

You just have to put a "midex.drv" file in cubase/mros/ folder.

Be careful, the driver may have been desactivated by renaming it as "midex.dr" instead of "midex.drv".

If you need this file I can provide it.
by yungjoon
Wed Mar 17, 2010 7:29 am
Forum: Applications
Topic: looking for ICDCDROM.BOS
Replies: 4
Views: 1125

Re: looking for ICDCDROM.BOS

I do not have spin! bos driver, where can I get this file ?
by yungjoon
Tue Mar 16, 2010 7:46 pm
Forum: Applications
Topic: looking for ICDCDROM.BOS
Replies: 4
Views: 1125

looking for ICDCDROM.BOS

Hi there, I connected to my Atari STe a scsi cdrom drive through ICD Link interface. I am trying to access it with metados but I don't have the correct driver, I need ICDCDROM.BOS. It came with old version of icd pro utility, I only have the new one with mint cdrom driver. Does anyone have this file ?
by yungjoon
Tue Mar 16, 2010 1:07 pm
Forum: For sale / Wanted
Topic: looking for extendos
Replies: 1
Views: 438

looking for extendos

Hi,

I am located in France and european sharewares does not sell it anymore. Anodyne software does not take into account european zone.

I am looking for this software to let my Falcon/CT63 and my 1040Ste/link1 access to a scsi cd drive.

I saw anywhere that extendos could do the job.

Thanks !
by yungjoon
Thu Jan 07, 2010 10:08 am
Forum: For sale / Wanted
Topic: ICD SCSI adapter and Notator for sale
Replies: 3
Views: 657

Re: ICD SCSI adapter and Notator for sale

Hi,

I sent a question through ebay but no reply.

Would you ship the link2 pack to France ?

Thanks.
by yungjoon
Thu Dec 24, 2009 11:32 am
Forum: Applications
Topic: connection atari<-> pc under linux
Replies: 4
Views: 735

Re: connection atari<-> pc under linux

Thanks for your replies. I tried the latest parcp version. And it did the job. I had to: - modify a standard parallel cable as explained in the documentation - generate a parcp.cfg file under windows - match a correct parallel port setting (in the bios) - run parcp under root And two way files trans...
by yungjoon
Wed Dec 23, 2009 4:51 pm
Forum: Applications
Topic: connection atari<-> pc under linux
Replies: 4
Views: 735

connection atari<-> pc under linux

Hello all,

I would like to do file transfers between my Atari 1040 Ste and my pc running linux ubuntu.
I wonder if there is a software under which do that ?

I had a look at parcp but I am not sure it will run under latest linux distributions.

Anyone managed to do that ?

Thanks.
by yungjoon
Fri Nov 20, 2009 10:12 am
Forum: CT60 / CT63 Area
Topic: aniplayer configuration on CT63 falcon
Replies: 9
Views: 1556

aniplayer configuration on CT63 falcon

Hi all, I find it very slow on my falcon CT63/Magic 6, and I wonder if is correctly configured. I downloaded it, unpacked it and ran it directly to watch a mpeg video, It was running at 2 fps max. Is there something to do to improve aniplayer execution with a 060 cpu ? I noticed a setup program but ...
by yungjoon
Mon Oct 26, 2009 8:08 am
Forum: Applications
Topic: Cubase 2.01 MCA crack, anyone?
Replies: 3
Views: 5276

Re: Cubase 2.01 MCA crack, anyone?

Hi,

It's shoud be available at http://www.planetemu.net/

Good luck.
by yungjoon
Thu Oct 08, 2009 7:28 am
Forum: Professionals
Topic: Falcon Cubase and IDE
Replies: 12
Views: 1671

Re: Falcon Cubase and IDE

Hey guys, So many GB ... But cubase audio runs only under TOS 4.xx, and the partition size can not be bigger than 1GB, am I wrong ? How do you access bigger sized partition with cubase audio ? You managed to run cubase audio under MiNT or Magic ? If yes I would be very interested to know how to do t...
by yungjoon
Tue Sep 29, 2009 7:43 am
Forum: Hardware
Topic: icd the link 1 driver ?
Replies: 17
Views: 1552

Re: icd the link 1 driver ?

You are right. This interface is painful and I spent hours to obtain nothing, only boot from zip drive, scsi hard disks seem to be unreachable (can not read/write boot sector of the hard disk trough the link 1). The hard disk I was trying to connect was an IBM DPES-31080 1Go which worked perfectly w...
by yungjoon
Mon Sep 28, 2009 1:39 pm
Forum: Hardware
Topic: icd the link 1 driver ?
Replies: 17
Views: 1552

Re: icd the link 1 driver ?

Hi wongck,

All format, partition and check commands can't see any drive.

It behaves like when no disk is inserted in my zip drive (can be listed with id check but no device to partition or format)...

Go to advanced search