Search found 11 matches

by danytyler
Wed May 06, 2020 4:19 pm
Forum: MiSTer
Topic: Special/Interesting controllers for MiSTer
Replies: 58
Views: 10970

Re: Special/Interesting controllers for MiSTer

I've just finished making the JogCon USB adapter, I thought I'd make this graphic in case anyone else wanted confirmation of the wiring on an ItsyBitsy 32u4. Pete Could you do the same with this controller? : (Ultra Racer PS1) https://www.savegames.eu/wp-content/uploads/2017/03/Ultra-Racer-for-Play...
by danytyler
Mon Apr 20, 2020 5:43 pm
Forum: MiSTer
Topic: Filters for Scaler
Replies: 54
Views: 19976

Re: Filters for Scaler

Would there be a problem in terms of lag or pixel perfect when combining the different filters?
Example:
Vertical Scanlines (Soft) + Scandoubler FX CRT 75% + gamma_poly_130.

I´m talking about it because combining these filters can achieve very good results.
by danytyler
Wed Apr 15, 2020 4:02 pm
Forum: MiSTer
Topic: Original analog video without I/O board? Possible!
Replies: 327
Views: 86063

Re: Original analog video without I/O board? Possible!

In the years of low resolutions with modified ATI cards on pc, I experimented with many out of range frequencies to crt tvs of all types and brands.
None of them ever broke. Signal not admitted is the most that could happen.
Hypochondriac fears.
by danytyler
Mon Apr 13, 2020 10:11 am
Forum: MiSTer
Topic: Arcade cores
Replies: 1278
Views: 350629

Re: Arcade cores

Kung Fu Master
by danytyler
Tue Mar 17, 2020 12:37 pm
Forum: MiSTer
Topic: ScummVM running on FrameBuffer
Replies: 143
Views: 63055

Re: ScummVM running on FrameBuffer

I'm sorry to have to refloat this thread. But I see that people are happy for having achieved scummvm in mister, and I join those congratulations, but I can´t forget the fact that no game can be played due to the delay that occurs after a few minutes of playing between the audio and the video. I see...
by danytyler
Tue Mar 10, 2020 5:28 pm
Forum: MiSTer
Topic: Scripting news
Replies: 248
Views: 106031

Re: Scripting news

Nice. Knowing that´s for purpose, I´ll do the migration of the folders to usb drive and issue solved for me. Logic storage solution.
Thanks for the reply
by danytyler
Tue Mar 10, 2020 12:15 pm
Forum: MiSTer
Topic: Scripting news
Replies: 248
Views: 106031

Re: Scripting news

In one of the latest updates, with a hard drive connected, the hard drive is set as the default route. To find the usual sd route you have to navigate backwards.
On each reboot it returns to the hard disk by default.
by danytyler
Fri Dec 20, 2019 11:08 am
Forum: MiSTer
Topic: ScummVM running on FrameBuffer
Replies: 143
Views: 63055

Re: ScummVM running on FrameBuffer

Any progress on the audio delay in scummvm games?
by danytyler
Mon Dec 09, 2019 1:47 pm
Forum: MiSTer
Topic: Help with starting cores (no video output)
Replies: 26
Views: 8247

Re: No HDMI signal when I load a core from menu.rbf

I have set up my MiSTer according to the instructions exactly, everything goes fine with the SD Card utility, etc. I do not have a RAM board, nor an I/O board. I am just trying to test NES, Genesis, and a handful of Arcade cores. When I choose the NES or Genesis core from the menu, all LEDs on the ...
by danytyler
Sat Nov 16, 2019 1:21 pm
Forum: MiSTer
Topic: SDRAM board
Replies: 480
Views: 249225

Re: SDRAM board

Some pass at 110MHz That must be a bad soldering. All 128MB modules properly soldered are passing at least 140MHz in memtest. The soldering is fine. :) Just switching DE-10 Nano boards shows different results. I have one DE-10 Nano board that won't pass any 128MB module (no matter which type, the M...
by danytyler
Tue Oct 29, 2019 3:23 pm
Forum: MiSTer
Topic: ScummVM running on FrameBuffer
Replies: 143
Views: 63055

Re: ScummVM running on FrameBuffer

After 15 minutes testing Full Throttle, the game becomes unplayable due to the obvious lag in the sound.
Waiting for a solution to this, because in this way ScummVM is not useful to play.

Go to advanced search