Atari-Forum

Anyone still using vmount to mount VHDs as rootfs for fie transfer? I tried it with the latest build and now only get errors: /media/fat/games/ao486# ./vmount /media/fat/games/ao486/DATA.VHD partition: none, disk: /media/fat/games/ao486/DATA.VHD, lower: 0, upper: 0 Trying to use '/dev/loop10' for t...

djsquare wrote:I have unibios 4.0 but for my MVS cabinet int he garage. I wonder how hard it would be dump the physical chip for use on the core

I dumped mine with a TL866 chip programmer. It was painless.

I think there are 1 or 2 fixes for games but other than that I don't believe there is anything really compelling. At least not in the context of MiSTer.

http://unibios.free.fr/download/whatsnew.txt

I’ve heard the person who sells 4.0 is taking a hiatus for a while. I have not heard when they plan if at all to start up again.

What causes the weird flickering in Phantasy Star I (part of Phantasy Star Collection) on the GBA? I thought maybe turning on Flickerblend in the core would fix it, but it doesn't. Is it using some kind of other style of flicker blending? Phantasy Star Collection_herky.png I've tried turning Flicker...

I think they are all mostly the same. I happened to have the NES one because I was using it with an NES at the time. You can plug in a USB cable and use it as a dongle. Which is how I use it. But I do think any of them will work.

I experienced that or worse. Switching to the 8bitdo dongle seemed to make my issues go away.

MiSTer doesn't have built in BT so you have to at least buy a USB BT dongle of some kind. In my specific case I have had all kinds of trouble with my BT dongle and the 8bitdo controllers. So I did end up buying an 8bitdo dongle and use that. It seems to work well.

What would cause the Gameboy core to not provide audio over HDMI? Right now all my cores are providing audio over HDMI except the Gameboy core. If I plug headphones into the line out on the IO board it does provide audio just fine. For some reason it does not want to provide audio over HDMI. Now if ...

Two MiSTer setups?

To me it sounds like Sorg is just asking for a little standardization within the core project. I think that is a reasonable ask.

It is fairly common within Free/OSS projects to have some level of standardization for 3rd party stuff, I don't see this as any different.

I think having the trimming on is closer to what you would have seen as a kid. I think old TVs cut off the edges of the image so the trimming is approximating that.

laserdisc wrote: I'm going to need a bigger boat.. er... sdcard

Thankfully they are getting cheaper by the day.

Would it be possible to have some kind of SD card image that could be fed into something like Etcher? I’m thinking something that has the bare essentials and the updater script. It wouldn’t need to constantly be kept up to date because the updater script would handle that. I honestly can’t think of ...

Those WiFi adapters are super fun. I just assembled one recently and have been surfing BBSes.

I would love this.

It's happening......

I am using a Panda PAU05 dongle: https://www.amazon.com/Panda-300Mbps-Wireless-USB-Adapter/dp/B00EQT0YK2/ref=sr_1_2?ie=UTF8&qid=1546618508&sr=8-2&keywords=pau05 I had to download rtl2870.bin from: http://www.lwfinger.com/firmware/ I copied it into /lib/firmware and it works fine as far as I can tell.

I have a MiSTer hooked up to a Sharp Aquos LC-20S1US(old SD 480p LCD TV) via VGA to component adapter(SOG switched on). The picture _mostly_ looks great, but every second or two the picture will very slightly jump either vertically or horizontally. I've tried a lot of combinations of configs to try ...

I just thought I would share this on the off chance it would help someone else. I’ve got a self assembled board and was having an issue where the VGA output had a green tinge to it. I went over the board with my 10x and checked and rechecked all my solder joints. Turns out I had the Sync on Green sw...

Hello,

I hope it is ok to post this here. I have a couple extras I am selling on my *tiny* Etsy page:

https://www.etsy.com/listing/656585568/ ... dram-board

I am located in the US.