Atari-Forum

i used the usb hub as i had plenty of room inside the case, no point in not using it when i already had it..... the power for the usb hub is taken from the dc input on the bottom on the de10, you can see the cable exit underneath the ethernet socket of the de10 the micro usb is also soldered underne...

i dont have a build log sorry..... i use a remote control power socket to switch the de10 nano on and off, so no need for a physical switch. the jst connectors you can purchase from quite a few places, but i got mine from an old stock pile of cables ive aquired over the years from scrapping tvs etc ...

Pac-Land all the way

from aliexpress:

Aliexpress case

done a bit of tidying on the cables

heres mine, going to re-do the usb wiring to the usb hub and the wiring to the buttons/leds as im not too happy how they turned out, didnt help that my hot air gun packed up just before i did them.... https://i.imgur.com/D7FvZOi.jpg https://i.imgur.com/lHguxCS.jpg https://i.imgur.com/DgJ8Y25.jpg htt...

I’ll take dual misters for sega 32x cd

retronerd wrote:I just assembled my 128MB mister sdram. When i plug it in it doesnt detect 128mb, only half of the chips. Do i need to change something in the ini file?

no it should auto detect......if it only shows 64MB and works ok with 64MB then check U3 and U2

yes i ordered some from osh park and so did some one else who ive never met and we got the same results back https://cdn.discordapp.com/attachments/497145588446396416/629406833391435777/image0.jpg https://cdn.discordapp.com/attachments/497145588446396416/629407796709949451/image0.jpg they put it dow...

Just a quick stock update as I now have the v1.2 USB hubs with the right angled micro USB bridge boards available. I currently have : USB Hub's v1.2 (with Micro USB Bridge Board) SDRAM XSD 128Mb v2.4 SDRAM XS 64Mb v2.2 Real Time Clock v1.3 Heat Sinks Inline Power Switches Bare unpopulated PCB's I a...

Nat is a great seller, nice solder jobs and fast delivery, never had any problems, and Thanks for the recent USB board for mister, includes everything to get up and running and good prices...

I think this is correct and supports my own findings. Ive found that on jlpcb boards if you solder at 310 and don't drag solder you will get 100% success rate and even the 7ctn chips will test at 150mhz ( which they shouldn't i know). However, if you dwell too much and especially at higher temps th...

what the format for the xml for .neo games? i think i didnt find it in github... thanks .neo files don't use xml. This format has header. Not all games will work from .neo it's produced by NeoBuilder tool: https://stoneagegamer.com/neosd-resources.html so i just load them? and thats it? i really di...

when i did my 64MB pcb with 6tin it showed lots of errors at 120 so it may be just the memtest ?

that one booted straight away

Some 96MB neogeo game play

https://youtu.be/upbMVQmCyNc

experimenting, for 2 pcb ram setup , so i can play with 96MB neogeo

On the new single pcb is it just the 3 aurdino connections which are wired to +v, A11 , A12 ? yes ive wired a 64MB chip on an older xs pcb with the wiring according to the diagram and its not recognised so 1 x XS pcb with 32MB and a modified XS with a 64MB chip and no go modified 64MB works fine on...

On the new single pcb is it just the 3 aurdino connections which are wired to +v, A11 , A12 ?

yes it does support hdmi

hahaha thought it was somehow , just thought i was missing some setting

ive not messed much with scummvm , is there any particular roms/games to have? as i got monkey island 2 with no audio

nice job, got it up and running, just one thing, how do i get the monitor and background to show?

nice one , ill test it when i get back

can confirm it fixed my issue

in all cores ive tried, 1942, 1943 , snes playing smw , genesis playing sonic

its as if it stops reading d pad, if i repress d-pad direction again it works again

im using a 8bitdo sn30 pro and can map the 2 analogue sticks aswell as the d-pad and buttons, now all cores use the left analogue stick for directions.... ive gone into each cores menu and re-mapped the directional buttons to my dpad, which works ok but sometimes if im pressing left then press right...

i was streaming something last week and it sounded ok on my monitor but could hear something similar through my headphones and thought it was my capture card....

but can confirm your findingd using Aladdin