Atari-Forum

Hi,

I'm not sure if it would be different per core etc, but I already use one of these on my MiSTer Amiga core and it works a treat:

https://amigastore.eu/en/512-mist-scart ... rt-tv.html

Image from my S34E790C

If it's still needed.

Sorgelig, thank you for all your hard work.

I've made a small donation.

Thanks again.

No problems here with your mentioned cores, latest MISTer file. Please check your mister.ini in config folder. Try vsync_adjust=1 or 0 Also try a lower resolution: video_mode=0 If this doesn't help please check if you have the correct mame set roms. Hi, thanks for the tips - it was the romset that ...

Hope this is the correct forum but I'm having problems with display output with a bunch of Arcade Cores; I don't get any output (screen goes into standby) on (I've tried other but can't remember there names so won't include them) Galaga Bomb Jack Alibaba on the other hand works fine I'm using the la...

kolla wrote:

gnasher666 wrote:Hi,

I'm having troubles with Pinball Fantasies

Running from ADF? From HDF? Installed, or via WHDLoad?

Hi,

Thanks for the response. I get this issue when loading the game via ADF's.

Hi,

I'm having troubles with Pinball Fantasies - when I exit a level it must try and save the highscore and I get an error WriteTrack Code: #27.

I've checked the obvious - nothing is write protected on the SDCard nor is the SDCard write protected. Any help would be appreciated. Thank you.

Bonk's Adventure loads but I can only see Bonk, the number of lives and the score. No level graphics are displayed. Blazing Lazers only plays the audio and no video output. Hope that helps. Has release 20180304 improved the stability/accuracy much? What percentage of roms are fully playable at this ...

The SDCard reading light is solid on and nothing else happens even with an ADF file mounted on DF0:

When I disable the HDD support I have a fully working Amiga which loads games and boots into Workbench as normal, including booting from the Workbench Install disk.

Still no luck,

I've tried a 2GB SDCard formatted as Fat16, and a 4, 8 and 16GB cards formatted as Fat32.

Followed the guide mentioned and all the advice given so far. Looks like I've hit road block.

Thank you for the link, I've already tried this guide and I still get the same issue.

Hi, I've been following any guide I can find to create a HDF file for use with the MiST, I've used HSTWB toolkit, created blank disks in WINUAE, created a blank disk file using DD in linux and regardless of how I've created it when I add it as a file within the MiST config I just get a blank screen ...