Atari-Forum

Hello i´m trying to setup the EPSS synth with the Hatari (v2.1.0) emulator, EPSS works in standalone mode but when i launch it with cubase and try to play a midi file the screen blinks black and white and i don´t have any sound, i test cubase 2.01 & 3.1 and diferent Tos images from STE to Falcon, an...

Interesting........Did you test with diferents bpm? , did you test a external midi keyboard?

Now in using a Ste (midi) in sync with a Roland vs-880 (audio) , and i´d like to replace the Ste for the MiST, so i need a perfect sync time...


Thanks!!!

A few days ago i fixed the MFP timer issue which made MIDI replay run 10% too slow. There always was this "hack" i needed to get MIDI replay stable. I found the actual problem and fixed it, so MIDI replay now works without any hack. And finally i found a small glitch in the ACIA receiver which caus...

Not mine:

http://www.ebay.es/itm/C-Lab-Falcon-MK- ... dbf&_uhb=1

regards

Dal ,can you test this CBX with 1.20c rom whith your STE and acsi to scsi converter?.

I used the midi TRHU of one CBX to the second.

Regards

My two cbx-d5 has 2.8a and 2.8c firmware version, they work with cubase cbx 1.01 but fail to record with cubase cbx 1.02.

3 in the same week!!!!!

Not mine: http://www.ebay.es/itm/ATARI-Falcon-030-14Mb-Ram-32Mhz-Beschleuniger-/141013494294?pt=Klassische_Computer&hash=item20d50f2a16 regards two more http://www.ebay.co.uk/itm/Atari-Falcon-030-32bit-classic-computer-from-1990s-4Mb-RAM-60MB-HDD-RARE-/111118673418 http://www.ebay.co.uk/itm/ULTRA-RA...

amazing!!!!

Great work Master!!!

MasterOfGizmo wrote:

INSPECTOR77 wrote:Will Mist have full midi in/out support, and run midi sequencer software like cubase or notator?
regards

Here you go:
http://www.youtube.com/watch?v=_cxeYKdnYuc

Great!!!!!!

Did you test midi in also?

Will need midi addon Solder points?

Regards

Hello, i didn´t found any information about the status of compatibility of the Suska project
What are working? Why there isn´t a subsection in this forum? i don´t understand the lack of information...his webpage don´t help much

Regards

Thanks a lot! finally i purchased a Roland vs 880 that works perfect with my STE, i have the atari as a "master" and Roland in "ext" and all is in perfect Sync

Regards

Will Mist have full midi in/out support, and run midi sequencer software like cubase or notator?
regards

@INSPECTOR77 Hmmmm.... That's frustrating that you can get the Atari to recognise and format the drives but SHDI doesn't see them at all. Sorry for asking the obvious question but do you have the power supply for the DMA-SCSI adapter? I still think it may just be a matter of setting the jumpers/swi...

Some images http://www.flickr.com/photos/95770197@N06/ The dma2scsi interface can´t handle big hd, so i try with a very old quantum 40 megas from a macintosh II, with this disc i can format-partition-mount without problems, i can see the hd and the cbx when i scan the scsi interfaces, but the steinb...

Thanks, i was thinking in a Roland vs series.....very cheap in this days.......seems to have MTC and can be Master or Slave.

Hello, which are the best digital multitracks recorders for sync with cubase audio 3.1 and atari Ste?
Is posible to control the digital multitrack Workstation from cubase?
Regards

I can't get it to work, i test all combinations, SHDI driver never loads HD or CBX,
My dma to scsi adapter is the first version, has an internal scsi port and four swiches

I used the ICD drivers to format the drives and put SHDI.PRG in the AUTO folder on the drive/partition I boot from (usually C drive). When my Atari boots up from C drive it runs the ICD drivers and lists only the hard drives (and their partitions) on the screen, not the CBX. Then SHDI.PRG runs and ...

I've been trying to get my CBX going this week too! I didn't have any success with my Mega 4 and two different SCSI adaptors but picked up a TT last week and finally got it going! I'm guessing it's down to the SCSI implementation, the Steinberg SCSI adapter should do the trick. As far as I'm aware ...

Hello i need help with my setup: I have an STE with TOS 1.62 (good DMA), 4 mg ram , the Steinberg dma to scsi interface, a Yamaha cbx-d5, a 1g Quantum Hd, and hddriver 7.93. Which are the steps to mount the Quantum Hd drive in the STE?, i made 4 partitions of 256 and then format the drive.....ok?......

Dal wrote:I ordered a SCSI interface from http://shop.inventronik.de/store Was also tempted to buy the Gigafile, I'll get it next month out of my bonus.

I have SCSI drives here so should be up and running with the CBX soon.

Hello Dal, did you test the atari-scsi interface with cubase audio??

regards

Finally after made a lot of testing and buy hddriver (thanks Uwe for the great support) i detect that the problem its the combination of cubase 1.0.2 an the yamaha cbx-d5.....( i think it has wrong rom version ) cubase audio 2.06 works whith hddriver and the built in audio input...so finally i decid...