Atari-Forum

I built a few of these since I had the parts. Assembled and tested PCB only, no enclosure. Will fit perfectly in a hammond 1591M enclosure. PM me if interested $35 US + shipping each. Connect old school Atari type joysticks to your PC (Windows/Linux/MAC). The Jakadapter allows connecting two Atari-s...

I'm not sure if I understand 100%. I was aware of people running multi-node BBS on Amiga and using DOS multitaskers such as DesqView. Given MiSTer cores only have access to a single COM port, I think that won't work. Are you talking about running multiple MiSTer's ? Yes, Deskview was one of the big...

Very strange. I have no idea about that. Vision-X seems to work fine at 57600... I ran Vision-X for a few years from 1989 to 1991 I believe. I had a lot fun with it. Are you planning on putting up a Vision-X BBS on the Mister? there were a few of us that ran multi-node, of course to do that back th...

When I conenct I get a "bad command or filename" and some sort of pseudo DOS shell: Bad command or file name C:\ViSiON-X>dir dir Volume in drive C is ViSiON-X .99▒ Directory of C:\ViSiON-X . <DIR> 09-04-93 3:29p .. <DIR> 09-04-93 3:29p LOGIN EXE 12033 09-04-93 3:41p SYSTEM2 EXE 9823 09-04-93 3:41p ...

Since 38400 is the default for ao486 core and midilink, does midilink for ao486 send a 38400 Connect result code of "28". Or is it just sending Connect of '1' result code? The default (unless you specify differently in the INI via TCP_BAUD=) for TCP mode is 115200 The result code sends "CONNECT 115...

so with the TCP_DTR=2 it will drop the carrier on the VisionX BBS. It just takes a few seconds. no big deal. Downloaded and updated the latest midilink. Seems the Vision-x requires the response codes to know when it connects, or it will just site there at locking port at 38400 bps.. turning off the...

So far I have not been able to get any of these Vision BBS programs to work for me. They just exit to DOS prompt after I make a remote connection... Hope that helps... Thanks for testing :) I have seen the BBS programs exit to dos, but it's usually because of an error like a file is not found and t...

Getting rid of the response codes is easy. I have not had much luck setting up Vision or Vision-x for testing the DTR hangup. For Vision-X tried "visx099r.zip" and I'm getting runtime errors. Does this program work with QEMM? For Vision I tried "v284betb.zip" and that one crashing saying "PDMATRIX.N...

This version of Midilink also works with LSD 1.35 BBS. I have pushed a new MidiLink where DTR drop causes the modem to hang up... I guess it may be a good idea to make that behavior optional via the "AT&D#" commands and MidiLink.INI. Thanks for testing! I redownloaded the upgrade script and re-ran....

This version of Midilink also works with LSD 1.35 BBS. I have pushed a new MidiLink where DTR drop causes the modem to hang up... I guess it may be a good idea to make that behavior optional via the "AT&D#" commands and MidiLink.INI. Thanks for testing! I updated the midilink but now no modem comma...

yes, I think making that optional via a AT command is a damn good idea!

This version of Midilink also works with LSD 1.35 BBS.

I have made sure my ao486 core is set to 38400. I have had partial success with bbs software. It seems if the BBS software uses the escape codes to hangup "+++,ATH" there is no issue with it hanging up (Oblivian/2 tested), but other software that use code to drop the DTR like Vision, Vision-x and o...

I'm really impressed with the use of this within the few cores. The thought that crossed my mind is someone may want to run a full retro BBS software on it for ao486 core. Something link Vision, VisionX, Emulex, Citidel or Renegade to name a few. I have tried to deploy all of these mentioned and th...

Your boot.rom is the wrong size, it should be 32k. Ensure that your basic and kernal roms are both 8K and your drive rom is 16K. copy /b basic.bin + /b kernal.bin + /b dos1541.bin boot.rom Now I get the correct size of 32768 bytes, but the same thing happens. 'No signal' when I luanch. the boot.rom...

Your boot.rom is the wrong size, it should be 32k. Ensure that your basic and kernal roms are both 8K and your drive rom is 16K. copy /b basic.bin + /b kernal.bin + /b dos1541.bin boot.rom Now I get the correct size of 32768 bytes, but the same thing happens. 'No signal' when I luanch. the boot.rom...

I have been trying to get the C64 core running, but with no luck. I have the latest C64 rbf file in my root as usual. I have created a 'C64' folder and placed a boot.rom file there. I have copied the files as follows to create the boot.rom file. COPY BASIC.bin + KERNAL.bin + C1541.bin BOOT.ROM /B i ...

I have a handful of these left. All Breadboard friendly for use in development of projects.

DB9 Male | DB9 Female | DB25 Male

come assembled or as a kit for you to assemble (you choose).

$3.00 US each + shipping

will combine shipping on quantity.

PM me if interested.

I'm really impressed with the use of this within the few cores. I specifically have tested with ao486 and CoCo3. The thought that crossed my mind is someone may want to run a full retro BBS software on it for ao486 core. Something link Vision, VisionX, Emulex, Citidel or Renegade to name a few. I ha...

I have designed an Atari2USB joystick adapter utilizing a Arduino Pro-Micro. I have printed a few boards and have tested with the PC/Linux with emulations with no issues. such as MAME. This unit does NOT act as a keyboard, but as an actual pair of game controllers. Windows and Linux will detect game...

I have a few of the USB hub boards v 1.2 (blank pcb's). I had to order a minimum order, so I have a few left if you are a DIY'er and want one contact me privately. $5.00(US) plus shipping each. I an also provide some of the components if needed for additional cost like the USB connectors, capacitors...

New to the ao486 core and I am wondering how much EMS can be available for this core. I currently have the expanded SDRAM module on my mister. I was thinking of toying around with an older BBS on it to see if it will run. my config.sys is very basic: DEVICE=C:\DOS\HIMEM.SYS DEVICEHIGH=C:\DOS\EMM386....

I have been trying to get the Linux LXDE to work with my mister device and followed the documentation from the site wit the latest LXDE image and display settings. However, my Mister when it tries to load my HDMI signal reads no signal detected. I have tried 1080p, 720p, and even 1024x768. Once I sa...

I built me a Atari compatible joystick for my TI-99/4A and it works well on the MiST as well!

Total investment of about $25. All arcade quality parts.

TI-99/4A would be a great one to have.