Atari-Forum

FYI I had no problem UPXing your demo binary, putting it in a 800kB disk image (attached) and launching it from my FlashFloppy in my 4MB STE
Great demo

Could it be bad RAM?

In Steam v4.0.0 after the undo part, there are 1 or 2 more 3D screens and then the scroller
"One of the most advanced screens ever coded for the Atari STE" is what is stated by the demo
What is the text you have in the state you reach?

Are you sure you have a SCART Adapter, not a JP21 one?
https://www.retrogamingcables.co.uk/eur ... ersus-jp21

Hello,
I might consider selling mine
Where are you from?

Sorry I cleaned up my tempdir a bit, a bit too much it seems. I've added the file again so the same link should work. Thank you! :cheers: I found the 50/60Hz tools there: http://paradize.final-memory.org/tools.shtml Is your flicker test compatible with 60Hz by the way? I had strange results with my...

A way to test is running a program that alters between two colours every second frame. If it flickers like mad, it's good, if it doesn't, it's bad. So I made a quick one for testing: http://ae.dhs.nu/tmp/flicker.zip The screen will cycle between green and purple every second VBL. A converter that o...

A way to test is running a program that alters between two colours every second frame. If it flickers like mad, it's good, if it doesn't, it's bad. So I made a quick one for testing: http://ae.dhs.nu/tmp/flicker.zip The screen will cycle between green and purple every second VBL. A converter that o...

Good news: I managed to recover the program from the disk, tried it on my STe and take some screenshots with Steem
Seems to grab only monochrome pictures

Schematc attached

I think I have what your are looking for, a hi-res french software called "COM 3.01" that was able to decode RTTY, FAX, Morse... I bought it from Diskimage in 1994. You have to build a printer port interface to use it (I cannot attach the schematic at the moment). Unfortunately I was never able to m...

Is 3.10 version OK?
I might consider selling mine

Attached are the Falcon Gerber files that I've got. I've never had much time to look into them, though. So I cannot say which revision of the board they represent. Here's a preview. Note that although it says Sparrow, the model number C303006-001 and the actual PCB layout clearly indicate it's a Fa...

I tried to install Geneva on Steem 3.9.4 but it reports "Geneva Disk B - Extras" is in an unrecognised format. Disk A is recognised. Downloaded Disk B again in case it had been corrupted -- same result Steem can't recognise it or open it. I don't have Hatari installed yet. Can anyone confirm that t...

Hello,
Is a vanilla Gotek usable in a 1040STE (1.62 TOS) or does it need to be flashed with a custom FW?

There are also plenty of micro-HDMI to DVI cable adapters: I don't know the legal aspect but maybe it is possible to use a HDMI plug to output only DVI data (no sound, no CEC...)?

Did you create that wiring diagram based off an actual dongle? I'm curious if the part was actually a 10L8? This is a schematic I found in the forum, not mine: http://www.atari-forum.com/viewtopic.php?p=111369#p111369 The wiring is the same as a dongle I found on the internet: http://www.nightfallc...

You're right, it won't help to clone the PAL but it might help to mimic its behaviour. Assuming the schematic is this one : 1. The PAL is clocked by the UDS signal, which toggles even if there is no activity on the cartridge port, inputing address bus data to the PAL 2. The PAL outputs will be enabl...

Indeed!
How did you hook up the HDMI connector?

Your results look very promising, congratulations!
May I ask you what dev board you are using? Or maybe you made your own?

It looks like a dongle for music software: http://reho.st/http://www.nightfallcrew ... G_9830.jpg

I'm glad I found this topic! I have a couple of rev. E STM-1 mouses (quite the same as mouse1.jpg above with soldered wires and yellow LEDs) that doesn't work... I think that there is more than 2 German edition... What year is that second German ed. ? What I call the second edition is the "ATARI Pro...

Be careful, you cannot use any USB mouse with it
Only those which can be used as PS/2 with this kind of plug: http://www.dx.com/p/usb-female-to-ps2-m ... WfbzFFpwyU

This (if you have a "PS2 over USB" mouse) : http://www.ebay.fr/itm/The-New-MKIV-Amiga-Atari-USB-mouse-adapter-converter-with-mode-switch-jumpers-/121413700949?hash=item1c44d20d55 or this : http://www.ebay.fr/itm/The-New-MKIII-Amiga-Atari-PS-2-mouse-adapter-converter-with-mode-switch-jumpers-/1112637...

Could it be an Amiga disk?
That would explain the strange noises (all NBS-related webpages are from Amiga enthusiasts)
There was a catalog of those disks, but I can't find one online
Maybe you can ask him: http://eab.abime.net/showthread.php?t=75085 ?