Atari-Forum

By attaching OS9Image.img (from a post above) as ACSI device 0, using BOOTOSK.PRG (from your previous post), and then - when prompted - inserting the OS9 boot floppy converted into a format actually suitable for Hatari (attached), I get to this: grab0002.png Very interesting...thank you for the ima...

Using your boot floppy gives the same results as if I try to boot from the HD image. If I insert the Cumana OSK disk 1 at the prompt request, I get a different error though "Boot failed, error status $00F7". Can confirm that. I imaged my working setup of an OS-9 (STE with a Gotek/FlashFlo...

I downloaded the zip file, but I can't get it working under Hatari. It stops after the OS-9/68K System Bootstrap message, with an error "Boot failed, error status $00F6" (this happens both if I attempt to boot from the HD, or the floppy image.) I am using an Atari ST, 1Mb, TOS 1.04 config...

DanyPPC wrote: ↑Wed Mar 16, 2022 2:18 pm Thanks RealLarry, it seems a very good solution, even if it costs.

You're welcome. That was my thought also: If'm able to pay ~€200 for a MiST and a handful of bucks for a used but good old MultiSync, I' should still be able to buy a needful stand (which will be still useful in some decades)

I understand, so there is no hope of being able to play these games on MIST unless you find a monitor that also spins counterclockwise. If you're having an adequate Monitor (ie MultiSync) which has a VESA mount option, you should consider buying a monitor stand which has a pivot function for 180^. ...

A little question: is it possible to have a different organization for the SD Card ? For example, I would like to have the following folders: Arcade Computer Console Tools The problem is that I can already create these folders and insert the respective cores, but if from the menu of each single cor...

troed wrote: ↑Wed Mar 09, 2022 9:59 amI have been in contact with Uwe, but since his test suite is showing the device is not following the standard I think the first order of action will be to fix the issues in upstream ACSI2STM: https://github.com/retro16/acsi2stm/issues/22

I see, thanks for the links. Will have an eye on this...

Alright, next issue ;) (Is there another support thread?) I'm trying to install HDDriver 11*. However, as soon as I reset or power cycle HDDriver no longer finds any devices. This STE has the "proper" DMA chip upgrade from Atari and works well with other ACSI devices so I don't think it's...

I am building Hatari 2.3.1 on linux. After running cmake it reports that capsimage v5 not found. Is capsimage library v5 for linux available anywhere? I went to http://www.softpres.org/download but the only v5 libraries were for Windows. Yes, there is. I've maintained capsimage (v5) for ArchLinux i...

Rightyright! Just finished the CosmosEx Debian Buster image. Anybody interested in can grab it here: https://drive.google.com/drive/folders/1Zoar6Ila8Zd7VdtHMVoulwGc-dPTDFDG Very nice. Installed it a few days ago and it worked perfectly. Thanks! Glad that it's still useful for someone. I should con...

Attached are two logs from the now non-working 16GB SHDC. One log ist with mist.ini, the other one without . core.rbf is Sorgelig's menu core. I'm leaving the cabled setup as it is, just in case you need more/other logs with different configurations, cards etc. Going well until this INI_PARSER : li...

Any way to create logs except of the usb2Serial method I have to build first ? (https://github.com/mist-devel/mist-board/wiki/Usb2Serial) Will a ft232 (or a similar device) also work? Any USB-serial converter should work, just beware of the logic levels (3.3V). Attached are two logs from the now no...

Ah, great to know. That's what I thought while viewing the mentioned circuit. Will do some logs then, as soon as I can find my adaptor - seems like it fell down from desk, catched by th cat to play with it ;) A cat will find it boring very soon, as it doesn't move by itself :) Absolutely correct, b...

slingshot wrote: ↑Fri Jan 14, 2022 2:11 pmAny USB-serial converter should work, just beware of the logic levels (3.3V).

Ah, great to know. That's what I thought while viewing the mentioned circuit. Will do some logs then, as soon as I can find my adaptor - seems like it fell down from desk, catched by th cat to play with it

slingshot wrote: ↑Fri Jan 14, 2022 11:17 amProduce some debug logs, and it can be checked.

Any way to create logs except of the usb2Serial method I have to build first ? (https://github.com/mist-devel/mist-boar ... Usb2Serial)
Will a ft232 (or a similar device) also work?

I'm having weird problems with the last firmware updates (220112 and 220112) and my SDHC cards >=16GB. None of them are working correct. core.rbf (menu) seems to boot (menu loads with "snow" but isn't showing any OSD or RBFs and keyboard and controller are disfunctional). Even cards with o...

The bad news is...(you all were just waiting for that, right?)... :) I still can't get Ultima III or IV to work with MIDI. I changed the settings like was mentioned in a couple of places and videos I found on Youtube but it doesn't seem to make a difference. Anyone actually have the Ultima's workin...

Where I can found ST HD image for mist and how to connect it ? I want to check how the hard disk image will work. Attached is an empty 250MB hard disk image. How to attach it to the MiSTery core see https://github.com/mist-devel/mist-board/wiki/AtariMassStorage Thank you. How to check if it reads w...

prcoder wrote: ↑Fri Nov 05, 2021 9:51 am Where I can found ST HD image for mist and how to connect it ?
I want to check how the hard disk image will work.

Attached is an empty 250MB hard disk image. How to attach it to the MiSTery core see https://github.com/mist-devel/mist-boar ... assStorage

https://github.com/mist-devel/mist-firmware/blob/test/firmware-test210916.zip Looks like this will become a nice weekend; Just rechecked three times with fw 210911, sometimes one device works, sometimes the other. Updated to Test-210911, rechecked three times again but no more issues detected! :che...

With 210911 Retroflag gamepad is not recognised immediately, but it works after I press the reset button on Mist. Retro-bit gamepad is not recognised at all. Can you try this? https://github.com/mist-devel/mist-firmware/blob/test/firmware-test210916.zip Maybe this affected me too the day before yes...

If we can get it in a well known CAD format also it would help. We would all need to split it differently to fit our printers I think. (Ultimaker 2 here - it's just outside of what I can print in one piece) The original author of this case has used Tinkercad https://www.tinkercad.com/things/h6diQsj...

I've made a HDD cover just some weeks ago. It's based on this https://www.tinkercad.com/things/h6diQsjfi4i cover and modded for a DeLock 91624 CF adaptor and the Lightning addon: https://forum.atari-home.de/index.php/topic,16285.msg257331.html#msg257331 If you need the "original" closed co...

Just tested my personal copy with Hatari/STE/TOS 2.06 and 1.62 but it is working fine. Image enclosed for testing purposes.

I check changed in XaAES log, only recent change is for ET4000 that need not use v_opnwk but rather v_opnvwk because driver already init at start, I don't think it is your case else probably crash before but there is same feature in MyAES for a long time now for ET4000, perhaps just try to add in m...