Atari-Forum

An old CDROM drive (with an adapter) works well too

Have you checked the resistors for reference / feedback for the TL431?

I donated 25 Euro today and I'll buy the book once it's out!

Macintosh IIci or Cisco 2501 routers are also an option (assuming your have access to a hot air workstation and an infrared pre-heater)

Video should be standard mp4 (and plays fine in VLC on Windows and Linux)

$ file Falcon_Boot_576.mp4
Falcon_Boot_576.mp4: ISO Media, MP4 v2 [ISO 14496-14]

Hi, I have a rather interesting issue with my Falcon and the CT60e here. Please have a look at the attached video. The machine boots, check RAMs, tries to boot (I guess) and then hangs. This only happens in 060 mode and only on cold boot. Press reset, all working next time. I have tested the Falcon ...

I'll look into redoing it in Eagle. To many projects, not enough time ....

Will 512MB double sided PC133 ECC DIMMS work with CT60e? Or do I need a NON-ECC one?

Me too!

Does anyone have a copy of the Gerber files? Looks like the site hosting them (one of the first posts) is down.

One of the diodes on the secondary side was shot. Replaced it and the Falcon came back to life! Would now like to put FreeMint onto it Are there any tutorials for Atari Falcon noobs available?

Hi, I have a Falcon power supply here that has some issues. Once switched on I can hear a ticking noise. 5V rail is good (measured 5.11V) but the 12V rail delivers only about 7.5V. Replaced all caps (reduced the 5V ripple) but the ticking noise is still there and the 12V rail is still bad. Any sugge...

Hi,

First post with hopefully more soon. I have bought an Atari Falcon 030 with 4MB and have ordered a CF adapter and an ethernet/usb adapter but I was not able to find a 14 MB board for sale anywhere. Is someone still selling them?

Regards
Christoph