Atari-Forum

i have the top of the range version (opition 2) with the extra drives, boot switch, hi/lo memory, clock and apple chips installed. I have also all the software and a database for the parameters. Drop me a line at steve@atari.org.uk and we'll sort out how to get things to you, if the other person doe...

Looks like it might be for the Atari 8 bit range, do you have a more zoomed out picture? It's photo'd to the size of the board, zooming out wont help as what you see if what there is. The other side is the usual pins to plug in. yes it is for the 8-bit atari, but i dont know what happy it's for. do...

I changed everything over, i repaired, made the clipped ic's good, the failed motherboard just to make sure it was faulty and yep would only fire up to desktop, no floppies detected! I removed the HD mod on it and fitted it to the other, didnt bother with the old serial port mod. Just awaiting a rep...

You need to make sure you have the Ajax floppy controller. Atari STe most definitely did not have one from the factory. It was an add on install. http://www.best-electronics-ca.com/custom-i.htm#Ajax Strange because mine has a factory installed ajax? Well 2 of them have, a 1989 mobo and a 1991 mobo!

The ic isn't a problem as it's designed that way. Just looks like a newer mobo. Everything works, checked it before stripping down.

Going to see if I can get this this up n running.

http://cdn-reichelt.de/bilder/web/artikel_ws/B400/DSN6.jpg It is such a part ? It has three pins, simply use a wire between pin 1+3 ... Confused.com! Are you saying connect them together? I keep forgetting that you can blow holes clear with a hot air station. As long as I rember rule 2, keep finger...

I've tried to get five out so far, they sort of disintegrate, they are so fragile and a very tight fit. Was wondering if I replaced it will new.

I got the knacker one out, well it was knackered and that came out in strips.

No it's the three pin inductor in blue, just under the shield near the monitor socket near where the psu foot sits. Usual stick screw driver under board and prise the mounts right at the back out.

Will try a photo tomorrow, but the seems lots of these, presumably same component.

Hi One of my machines finally died, suspected HD module, anyway came across a nice late version ste with the Ajax chip fitted, and compared with another ste, it had one chip missing do they must have done something else with them. I'm digressing, so I dea was to transplant the motherboard into the c...

yes i would be interested, price may be the main hurdle.

I have cosmsex for the ST, on the Mega STE and is making software trransfer oh so much better and to be able to run something similar on falson would e a boon.


Steve

Sorry for the delay, switched to computer as ipad isnt that flexible when it comes to pictures on forums..

I've had some fun, have been having problems partitioning sd card with latest hd drive version 9, I get can't write to boot and can't write to root. It gives me 3 partitions! That's a 4 meg, also tried with 8 meg and 2 meg. It does a 128meg sd in compatible windows mod fine. So is it hd driver or C...

I have a small happy board marked HCI HC1050G on the board. It has a SY6502 on the left, an IC at the top and empty socket at the bottom. From what I gather it needs some sort of happy eprom fitted. I have no idea on this and can't find any instructions for it on the web. This board is brand new and...

My turn. I've had some fun, have been having problems partitioning sd card with latest hd drive version 9, I get can't write to boot and can't write to root. It gives me 3 partitions! That's a 4 meg, also tried with 8 meg and 2 meg. It does a 128meg sd in compatible windows mod fine. So is it hd dri...

actually, for me WiFi support is a lot more than 'nice to have' My router is in another room therefore I would avoid a return to the Ethernet cable. Well I use a nifty device for ethernet to go wireless, to enable to go wireless. Do an eBay search for buffalo 300n. I use one for falcon in a back be...

With the new Pi being released, B+, at the same price as the old version means there are going to be plenty of model b's being sold by people who want the latest version and at a very good price - just picked one up for £17. I dont think you would gain any advantages using a B+ with CosmosEx. I look...

i do have scsci devices... at the moment have my lighthouse towered ste, mega ste and falcon up and running. will se what i can do with the ide interface that uses the sd card. Nice to have a session on falcon then switch to pc to speed stuff up, like cd/dvd burning. Steve Atari.org.uk atarian.com r...

Well this thread is more alive than atari age... but still the same complaints. i contacted mr zaxxon about the netsubee over a year ago, i wanted something that i could easily transfer the mountain of Atari software i have to archive it etc, offered to make me one at cost as long as i supply compon...