CTCM modules for older versions of CT60

Discuss CT60/CT63, CTPCI, SuperVidel and EtherNAT hardware here.

Moderators: Mug UK, [ProToS], lp, moondog/.tSCc., Moderator Team

rj1307
Atarian
Atarian
Posts: 5
Joined: Tue May 16, 2017 10:19 am
Location: Wałbrzych/Poland

CTCM modules for older versions of CT60

Postby rj1307 » Thu Dec 06, 2018 9:29 pm

I was asked to do CTCM modules for older versions of CT60, I still had 8 pcs.
Image Image

If someone needs, then the price is 22 euros + 5 euros shipping.
Mounting either in the original stand, or you need to solder in place if you use CTPCI.
Image Image

The jumper allows you to switch on the prescaler with division by 2, which means halving the output frequency. This in case the frequency was too high and the processor did not get up.
Image

It is necessary to barter two wires from the bottom of CT60 and possibly a small PCB modification, as described by R.C.
http://powerphenix.com/ct60/english/update.htm

Contact on rj1307(at)wp.pl

Social Media

     

Return to “CT60 / CT63 Area”

Who is online

Users browsing this forum: No registered users and 4 guests