Amstrad CPC 6128/664 (NEW)

[desUBIKado]

I've tried a series of games that are hard to emulate for a number of issues. The list is this:

1. Sorcery
2. Killer Cobra
3. Tornado Low Level
4. Mission Genocide
5. Agent X II
6. California Games
7. Stryker
8. Enlightenment - Druid II
9. Usagy YoJimbo
10. Prehistorik 2
11. Booty

All work perfectly with the latest version of the core

I leave a document in Spanish with the list of games, the reason for its difficulty to be emulated and a download link for each of them.

Juegos.docx.zip

These games were discussed in a program on the YouTube channel Amiga Wave, where they were talking, in spanish of course, about emulators running inside a Commodore Amiga.

https://www.youtube.com/watch?v=VB6QsEY ... t=1h48m46s

[desUBIKado]

I rename ParaDOS V1.2 rom to BOOT.E07 and I move it to root directory of SD card. This rom don't load at start of core, but works if I load it manually from OSD menu. Where I must put this file to load at start of core? Thanks in advance

[Sorgelig]

I rename ParaDOS V1.2 rom to BOOT.E07 and I move it to root directory of SD card. This rom don't load at start of core, but works if I load it manually from OSD menu. Where I must put this file to load at start of core? Thanks in advance

This part is marked as "MiSTer specific" and boot.* files should be in Amstrad folder.

[desUBIKado]

This part is marked as "MiSTer specific" and boot.* files should be in Amstrad folder.

Thanks. I am so excited with this core I didn't read all instructions "despacito"

[Sorgelig]

Druid II issue (Usagi has similar problem) will be fixed in next release.

[vebxenon]

How about USB joystick/pad? With last core it doesn't work well

[Sorgelig]

Core doesn't deal with USB or DB9 directly as i've wrote before. It's up to MiST Firmware.

[vebxenon]

Core doesn't deal with USB or DB9 directly as i've wrote before. It's up to MiST Firmware.

Ok, I've put two pads and joystick 2 is recognized as joystick 1. So I can play the games.

[vebxenon]

So maybe useful an option to exchange the joystick ports as on C64 core.
I use only one usb gamepad for MiST.

That can be done?

[Sorgelig]

I will add joystick swap option

[DrOG]

THX!!!

[Sorgelig]

Release 20180812:
- Tweaks and fixes in CRTC and GA.
- Hide MF2 ROM when MF2 is disabled.
- Option to disable FDC
- Option to swap the Joysticks.

Druid II and Usagi should display correctly now.

[DanyPPC]

Release 20180812:
- Option to swap the Joysticks.

Yeah !!!

Many thanks Sorgelig for add this useful option ! You are great

[DrOG]

Thanks for all the improvements!

[RobeInie]

Thanks for the option for swapping joysticks , I had the same problem and this will solve !!

One question Sorgelig,
Will be CDT support on MIST ? (I see it is only on Mister)

Thanks !

[Sorgelig]

Will be CDT support on MIST ? (I see it is only on Mister)

Current CDT/TZX implementation on MiSTer cannot fit into MiST.

[christianlucio]

Many thanks to Sorgelig for again doing a fantastic job. Some of the most important cores for me have improved much due to your great work ! Now only the Atari ST core and the Amiga core are left........

[vebxenon]

Release 20180812:
- Tweaks and fixes in CRTC and GA.
- Hide MF2 ROM when MF2 is disabled.
- Option to disable FDC
- Option to swap the Joysticks.

Druid II and Usagi should display correctly now.

Thanks very very much!

[arty]

Release 20180812:
- Tweaks and fixes in CRTC and GA.
- Hide MF2 ROM when MF2 is disabled.
- Option to disable FDC
- Option to swap the Joysticks.

Druid II and Usagi should display correctly now.

Well done! Thank you.

[seastalker]

THANK YOU!!! Really looking forward to diving into this one AND the resolution now plays nice with my IBM PS1 monitor!! Loaded up a few titles and so far so... wonderful!!

[Higgy]

- Tape input through UART_RX pin (same as in ZX core)

Just to say I tried the tape demo 'Breaking Baud' on my MiST (with added tape input soldered on) and it worked well.

[DanyPPC]

Hello Sorgelig, could you upgrade this fantastic Amstrad core for YPbPr support ?

Many thanks from the community.

[Sorgelig]

I've released the new version.
YPbPr has been added by slingshot. I didn't test it.

[DanyPPC]

and yes, it works !!!

Many, many thanks Sorgelig

[SchneiderCPC664]

This is a little bit picky, but the Amstrad startup screen is to fast displayed compared to the original CPC and the older core. Is it possible to change this?