recently I have noticed a strange issue. I've had a Falcon+CT60e+SuperVidel up and running for some time. I moved from Australia back to Europe this year, still have the very same Falcon setup except the monitor(s). Back in Brisbane I didn't have anything special, just an LCD with VGA/DVI input. Here in Slovakia I have a far better LCD and guess what, it doesn't allow full HD from my SuperVidel! (of course, it is a full HD monitor, I'm typing this from 1920x1080...)
Has anyone ever experienced something like this? I'm totally fine going up to 1680x1050 from the desktop (the LCD's scaling isn't that bad, actually) but 1920x1080 - nope. Both modes (60 and 61 Hz). It just shows "Signal error" and black screen. Tried different DVI/HDMI cables, reflashing FW10, lowering the CT60 clock to 66.6 MHz, ... no difference.
Talked to the Nature guys, couldn't really recommend anything, they have been quite sceptical about being able to fix it by one of the FW11's files.
I'm going to try FW11 (when my JTAG USB cable arrives) but if you can think of something in the meantime, I'm all ears.
P.S. OK, there's one thing I haven't tried yet - CT60/CT63 and another SuperVidel. Will do in the meantime although I don't get my hopes too high.