joska wrote:Ok, progress! I very carefully removed my beloved Afterburner from my first Falcon and tested the CT there. It boots, but crashes while copying TOS to RAM. I guess mikro is right and that my CL3 RAM is not suitable.
Next step was to debug my other Falcon. Turns out the buffer patch was the problem, there was no clock to the expansion port! No wonder the CT would not boot... I wish I could blame someone else for this but it's entirely my own fault, I did not replace R216 when I removed the BlowUp FX and restored the original Atari clockpatch.
And what's better - one of my CL3 DIMMs are actually working! I see the desktop!
ahh! you must completly restore to original specs!!