I'm looking for an Eiffel interface ...

Troubles with your machine? Just want to speak about the latest improvements? This is the place!

Moderators: Mug UK, Zorro 2, Greenious, spiny, Moderator Team

Fantomas
Atariator
Atariator
Posts: 29
Joined: Sun May 01, 2005 8:41 am
Location: France
Contact:

I'm looking for an Eiffel interface ...

Postby Fantomas » Tue Aug 22, 2006 8:36 am

... coz i would use PC mouse and keybord in my Atari Falcon :wink:

But i don't know where i can find it. I try to see on Satantronic web but "We are very sorry but due to many reasons Jookie decided to not continue the making and selling of Eiffel interfaces"

I'm looking for the "small" model, with PS/2 connectors only.

thx for your help !

artik-wroc
Obsessive compulsive Atari behavior
Obsessive compulsive Atari behavior
Posts: 133
Joined: Fri Jan 06, 2006 1:30 pm
Location: Wroclaw - POLAND
Contact:

Postby artik-wroc » Wed Aug 23, 2006 6:30 am


User avatar
DarkLord
Fuji Shaped Bastard
Fuji Shaped Bastard
Posts: 4373
Joined: Mon Aug 16, 2004 12:06 pm
Location: Prestonsburg, KY - USA
Contact:

Re: I'm looking for an Eiffel interface ...

Postby DarkLord » Wed Aug 23, 2006 2:27 pm

Fantomas wrote:... coz i would use PC mouse and keybord in my Atari Falcon :wink:

But i don't know where i can find it. I try to see on Satantronic web but "We are very sorry but due to many reasons Jookie decided to not continue the making and selling of Eiffel interfaces"

I'm looking for the "small" model, with PS/2 connectors only.

thx for your help !


I can't help with the Eiffel, sorry - but I think you can still get a DEKA interface that will allow you to use a PC keyboard -but not a PC mouse.

You could get a DEKA, and then use the PEST mouse interface?

Not sure how much all that would cost you though...

HTHs.
Welcome To DarkForce! http://www.darkforce.org "The Fuji Lives.!"
Atari SW/HW based BBS - Telnet:darkforce-bbs.dyndns.org 520

User avatar
stimpy
Captain Atari
Captain Atari
Posts: 305
Joined: Mon Aug 22, 2005 2:47 pm
Location: Somerset, UK
Contact:

Postby stimpy » Wed Aug 23, 2006 3:31 pm

I've had a few requests for Eiffels so perhaps a small run of about 10 could be possible? Even making a new design to support extra features of the new Eiffel firmware (which Didier has done a grand job of) shouldn't take too long.
Netus-Bee,Repairs,Upgrades,EtherNEC,Eiffel

Fantomas
Atariator
Atariator
Posts: 29
Joined: Sun May 01, 2005 8:41 am
Location: France
Contact:

Postby Fantomas » Thu Aug 24, 2006 6:33 pm



Ok, it is the right link !
Thanx for all your replies :wink:

Fantomas

User avatar
christos
Fuji Shaped Bastard
Fuji Shaped Bastard
Posts: 2456
Joined: Tue Apr 13, 2004 8:24 pm
Location: Greece
Contact:

Postby christos » Thu Aug 24, 2006 6:39 pm

And something for the rest of us who can't read polish?

Atari Generation One
Atarian
Atarian
Posts: 8
Joined: Tue Aug 22, 2006 10:19 am
Contact:

Postby Atari Generation One » Thu Aug 31, 2006 2:24 pm

For those whos still thirsty of PS2 devices on Atari i can propose Eiffel with newest firmware and in few options.

Like TOWER version (ST,FALCON - with or without JOY ports, or ports on ribbon), MEGA ST/E/TT External version closed in small case :)

And in optional every each with LCD module as extra.

just ask me for, can be in polish ;)

User avatar
christos
Fuji Shaped Bastard
Fuji Shaped Bastard
Posts: 2456
Joined: Tue Apr 13, 2004 8:24 pm
Location: Greece
Contact:

Postby christos » Thu Aug 31, 2006 4:00 pm

Sorry, just a bit confused...
Are you the one making them? If so how much will it cost for a version with joystick connectors? If not who do I have to contact?
Thank you
:)

Atari Generation One
Atarian
Atarian
Posts: 8
Joined: Tue Aug 22, 2006 10:19 am
Contact:

Postby Atari Generation One » Wed Sep 13, 2006 2:34 pm

christos wrote:Sorry, just a bit confused...
Are you the one making them? If so how much will it cost for a version with joystick connectors? If not who do I have to contact?
Thank you
:)


Hello christos,

yes im the one who make ths Eiffels. IF you want one you must contact with me :)

You mean version with JOY connectors on one side with PS2 or JOY connectors on ribbon cables?

cheers
Pawel Kaznowski
AGO Systems

User avatar
christos
Fuji Shaped Bastard
Fuji Shaped Bastard
Posts: 2456
Joined: Tue Apr 13, 2004 8:24 pm
Location: Greece
Contact:

Postby christos » Tue Nov 07, 2006 5:25 pm

Just to let everyone know that today I got an Eiffel adapter by AGO and it works perfectly. I haven't tried it in everything but moving the mouse is so smooth and the keyboard seems so much more responsive. It all went smoothly and I' d like to thank AGO for everything. I hope he'll make more hardware projects so I can consume them ;)

User avatar
karlm
Atari Super Hero
Atari Super Hero
Posts: 713
Joined: Thu Nov 13, 2003 4:09 am
Location: Top of the World - Australia

Postby karlm » Tue Nov 07, 2006 10:00 pm

Pawel/Christos ...

how much are we talking here? $$ or euro or whatever is the biggest question for most of us...

cheers

karlm

User avatar
christos
Fuji Shaped Bastard
Fuji Shaped Bastard
Posts: 2456
Joined: Tue Apr 13, 2004 8:24 pm
Location: Greece
Contact:

Postby christos » Wed Nov 08, 2006 10:01 pm

karlm wrote:Pawel/Christos ...

how much are we talking here? $$ or euro or whatever is the biggest question for most of us...

cheers

karlm


I don't think it would be proper for me to disclose a price in public. You should probably contact Pawel for that. I can say though that it was cheaper than going to ebay.de buying an st and having it shipped to Greece. And I had a couple of wonderful hours with it today. Using a roller in the atari is just beautiful. Now I have to think how to make a case for it since my original idea on how to place it in the standard falcon wasn't that great....A carton box wouldn't be that good would it?


Social Media

     

Return to “Hardware”

Who is online

Users browsing this forum: No registered users and 2 guests