
Moderators: Mug UK, Zorro 2, Greenious, spiny, Moderator Team
solskogen wrote:I use menu.rbf to load the other cores, could you try that as well?
solskogen wrote:I use menu.rbf to load the other cores, could you try that as well?
vebxenon wrote:I've tried it. No success. Kickstart doesn't boot.
GoingDown wrote:vebxenon wrote:I've tried it. No success. Kickstart doesn't boot.
Can you delete minimig settings file and create new configuration from scratch? Just in case something is messed up there?
Code: Select all
CPUlvl=2, Mask=ffffffff Code=00740000
RTR:
data/68020/rtr/0000.dat. 0...
0: 4e77 rtr
A7: expected 00777ffe but got 00778004
Registers before:
D0: 00000010 D1: 00000000 D2: ffffffff D3: ffffff00
D4: ffff0000 D5: 80008080 D6: 7fff7fff D7: aaaaaaaa
A0: 00000000 A1: 00000080 A2: 00008000 A3: 00007fff
A4: fffffffe A5: ffffff00 A6: 0073ff00 A7:*00777ff8
SR: 0400 PC: 00740000 ISP: 0077ff80 MSP: 00780000
T1=0 T0=0 S=0 M=0 X=0 N=0 Z=0 V=0 C*0
Registers after:
D0: 00000010 D1: 00000000 D2: ffffffff D3: ffffff00
D4: ffff0000 D5: 80008080 D6: 7fff7fff D7: aaaaaaaa
A0: 00000000 A1: 00000080 A2: 00008000 A3: 00007fff
A4: fffffffe A5: ffffff00 A6: 0073ff00 A7:*00778004
SR: 0401 PC: 00741c3a ISP: 0077ff80 MSP: 00000000
T1=0 T0=0 S=0 M=0 X=0 N=0 Z=0 V=0 C*1
OK: No exception generated
Code: Select all
CPUlvl=2, Mask=ffffffff Code=00740000
RTR:
data/68020/rtr/0000.dat. 0...
data/68020/rtr/0001.dat. 226...
All tests complete (total 226).
retrofun wrote:MiST 1.3+
Firmware 190820
minimig core 20190922
68000/OCS/Kick 1.3/0.5 Chip/0.5 Fast
Milongero wrote:Hi
The only difference is i use 1mb chip ram and no fast ram
retrofun wrote:slingshot wrote:Cool! Strange this CPU test doesn't even pass in WinUAE 68020 mode (or just used a wrong setup).
Maybe you can fix that pinball game, too?
cputest works fine for me on WinUAE.
I'm aware of the problem with Pinball Illusions but could not track down the problem yet... (also due to lack of time). Any hints, anyone?
retrofun wrote:slingshot wrote:Cool! Strange this CPU test doesn't even pass in WinUAE 68020 mode (or just used a wrong setup).
Maybe you can fix that pinball game, too?
cputest works fine for me on WinUAE.
vebxenon wrote:minimig_mist_20190926.rbf doesn't work to me also. MiST first light flashes, I get a blank screen and nothing happens. I only get the first information Minimig screen then hangs. Using minimig_mist-20190418.rbf everything works ok. I've done everything... I give up
retrofun wrote:Fixed the RTR instruction!
Does NOT fix any issue I currently know (testkey4, Pinball Illusions).
Code: Select all
Blasteroids
Deflektor
Epic
F-16 Combat Pilot
Gods
Road Wars
retrofun wrote:
These WHDLoad games now work with the RTR instruction fix:Code: Select all
Blasteroids
Deflektor
Epic
F-16 Combat Pilot
Gods
Road Wars
retrofun wrote:TG68K: fix ADDX.B, SUBX.B instructions
https://github.com/retrofun/minimig-mis ... 08bb065c06
TG68K: fix CMPM.B instruction
https://github.com/retrofun/minimig-mis ... d5ba0ad8ec
minimig_mist_20190928.rbf
retrofun wrote:Does NOT fix any issue I currently know (testkey4, Pinball Illusions).
slingshot wrote:I did a little debugging with Pinball Illusions, and found out that no trap_illegal signal set inside the TG68K, so probably not an unimplemented instruction. trap_trace is set at $FFDC0004, and this address looks suspicious. Maybe jumping there is already an error.
[mist]
scandoubler_disable=0 ; set to 1 to run supported cores in 15khz
mouse_boot_mode=0 ; set to 1 if a mouse does not work well
joystick_disable_shortcuts=0 ; set to 1 to remove joystick -> keyboard commands
joystick_ignore_hat=0 ; set to 1 if having issues on gamepads with 'POV hat'
joystick_ignore_osd=0 ; set to 1 to prevent gamepad from controlling OSD
; joystick_remap=0583,2060,1,2,4,8,10,20,20,8,1400,2800,40,80
joystick_remap=0810,E501,1,2,4,8,200,20,10,100,400,40,0,0,0,80
joy_key_map=1000,E2
joy_key_map=2000,E6
joy_key_map=4,51
joy_key_map=8,52
Higgy wrote:Vebxenon - so you get the initial Minimig info screen with text at the bottom showing memory config etc? Then it goes black so F12 does not work?
I have also a v1.2 and I am sure I have had same issues as you on other Cores so I think our hardware is same (memory chip same).
The only thing I have done is remove a SMD resistor so the audio channels have complete separation rather than blended as the MiST PCB design.
Not that I can see any difference.
I am only using USB devices at the moment. No dtype mouse/ joysticks
Users browsing this forum: No registered users and 2 guests