Moderators: Mug UK, Zorro 2, Greenious, spiny, Sorgelig, Moderator Team
sonycman wrote:Hi guys,
It seems that native video output of minimig (VGA) hardcoded to 28 MHz pixel clock, resulting in constant 640x480 (or similar) resolution.
Is this correct?
If so, could it be possible to send this video stream via HDMI 576p (without the scaler) as nearest resolution?
Should the active pixels area fit into it fine?
I'am just thinking about porting this core to another fpga board...
sonycman wrote:I plan to not use any scaler at first, as I seen posts about it causes some flicker on interlaced frames.
Sorgelig wrote:Even moving cursor in WB in interlaced mode almost has no flickering.
kolla wrote:Sorgelig wrote:Even moving cursor in WB in interlaced mode almost has no flickering.
No flickering, but it "tears up" when moving, it gets a "ghost" following it sort of closely
https://youtu.be/E31wCNpdaOs
Sorgelig wrote:Test version:
Minimig.zip
Some fixes and tweaks for 64MB modules.
It's absolutely required to update MiSTer binary and Menu core which will detect the module size!
Sinclair wrote:Sorgelig wrote:Test version:
Minimig.zip
Some fixes and tweaks for 64MB modules.
It's absolutely required to update MiSTer binary and Menu core which will detect the module size!
Works fine!
Thank you.
Sinclair wrote:I am sorry to say now that although it boot without problems the system has become unstable with continuous Worbench errors and strange behaviors in some games.
I have returned agaub to the July version
Sorgelig wrote:Sinclair wrote:I am sorry to say now that although it boot without problems the system has become unstable with continuous Worbench errors and strange behaviors in some games.
I have returned agaub to the July version
Are you using official XS version of 64MB module?
Sinclair wrote:Sorgelig wrote:Sinclair wrote:I am sorry to say now that although it boot without problems the system has become unstable with continuous Worbench errors and strange behaviors in some games.
I have returned agaub to the July version
Are you using official XS version of 64MB module?
Yes, XS 1.1
Sorgelig wrote:Sinclair wrote:Sorgelig wrote:Are you using official XS version of 64MB module?
Yes, XS 1.1
can you try with 32MB module?
Sorgelig wrote:try this one:
Minimig2.zip
R4MS wrote:Minimig on MiSTer supports reading and writing to 880K ADFs.
Users browsing this forum: No registered users and 10 guests