Paul, please check the Snes interlaced signal issue with these vga adapters.
JamesF wrote:I have many of the vga adapters and most of them work great, the famous Tendak doesn't work, but the cheaper ebay ones do work.
JamesF wrote:Most expect 16-235 limited range and will clip black shades if receiving full range 0-255.
Use hdmi_limited=1 with these adapters if you see missing black steps with 240p test suite and Pluge pattern.
SNES interlaced test (YPbPr)
JamesF wrote:ADV7513 has "RGB Quantization range" on address 0x57 bits [3:2) that should be set to '10' Full Range, because the Default '00' is always Limited Range.
For some reason the ADV7513 does not use Full Range as default for RGB, and these VGA DACs read that "RGB Quantization range" flag and respect it.
I know this because the RetroTink2x has ADV7513 too and I helped Mike (creator) to tweak its HDMI output.
Code: Select all
hdmi_limited ? 2'b01 : 2'b10
Hewhoisred wrote:Here are some pictures of the mod in case anyone might find them useful:
Sorgelig wrote:Hewhoisred wrote:Here are some pictures of the mod in case anyone might find them useful:
thanks for pics!
But i suggest to cross the sides in that recessed place near VGA connector because board edges i think touch the case and that wire on edge will make board position uneven.
JamesF wrote:The 'B' variant doesn't work with the Genesis core, but does work with Menu and Snes cores.
JamesF wrote:Is this the same PR from paulb-nl?
JamesF wrote:Typa 'A': Algoltek AG6200
Type 'B': CM6616
Type 'C': Chrontel CH7101B-BF
Users browsing this forum: No registered users and 0 guests