emcclariion wrote:But the mouse pointer is a small white squire...
I had something like that. After expanding memory (1MB --> 2MB, all banks), card works correctly.
This is a VRAM Card, requires a module to upgrade.
Was looking at the chipset on his card, and my other ATI M64 w/4mb, chipsets are the same.
I'd never used an ATI 32 or 64 in a TT, only on an Afterburner/Nova setup. It's been a while, recall swapping them out in this machine with no differing results. But it was just a brief test.
With Falcon TOS, there is always some caveat using other than 15/16 bit FX. Thought that likely an issue here with TT TOS, after reading a bit about the new "to me" TT hardware, might be something to look into.
BTW, the 4MB card used with the Falcon Afterburner setup was bus clocked at 20mhz no problem. 22mhz worked as well, but other issues running the Afterburner at 44mhz start to creep into the setup.
You do not have the required permissions to view the files attached to this post.