cvenditti wrote:Do we have a BOM available for the USB Hub board?
I look on the Wiki and on the Hardware_MiSTer but I can find it.
as always, most components (connectors, passives) i buy in local store, so i don't have BOM.
I've only bought online FE2.1: https://lcsc.com/product-detail/USB_FE2-1_C39693.html
- currently out of stock, Aliexpress should have it.
crystal is like this one: https://lcsc.com/product-detail/SMD-Cry ... 12573.html
Everything else are pretty generic.
LEDs are 0805 green/orange/red.
What i've noticed is that orange LEDs are never lit. May be it's for very specific situation and most likely you don't need to solder them.
LEDs should be with lowest light power as they are not for light but for signaling. I had to cover mine with black tape as they are too bright.