svupd005.app crashes with Access Fault

[alanh]

Anyone else get this in 060 mode ?

Not sure if my SuperVidel is already at 005 or not but thought I'd give this a try.

[instream]

Does the SV still work after this happens?
Did you run it in TOS or Mint?
When does it crash?

[alanh]

Just booted to TOS, no MiNT at all.

Double click the APP, and it appears to crash when it's finished loading, so expecting it to start executing the APP.

The whole machine is then dead as it displays the Access Fault message with a full dump.

[instream]

Sounds like the app has been corrupted when you downloaded it.

[alanh]

Don't think so, just downloaded it again, same file size and same md5sum.

1180165 bytes

c4f232e2a71d3e900af93fbdab4df31b

[instream]

I just tried downloading the app using netsurf 2.9 in mint 1.17.0, then set the flags using chmod 755, then ran it from conholio. It started ok.

[alanh]

Do I need MiNT ?

Can you try it from plain TOS ?

[saulot]

i've updated everything under tos 1.03c, no problems at all.

[alanh]

I also have CTPCI installed. Can that cause problems ?

[instream]

It works from TOS too. I can't test with a CTPCI, but you should make sure your CT60 ABE and SDR FW are the latest. If the CTPCI is inactive I guess there should be no problem with svup005.app.

[alanh]

ABE & SDR are the latest. Sometimes it just hangs after loading and the mouse freezes.

[alanh]

I can run the APP in 030 mode, but obviously it doesn't detect the SV then.

[instream]

Don't try to update the SV from 030-mode. Some people have bricked their SV that way. Then you need a JTAG cable.

[alanh]

I know, but just saying that it runs in 030 mode, so the APP checksum is o.k. and it executes. But crashes in 060 mode.

Just a side note, that maybe the APP should exit if it detects 030 mode so people can't brick their SV's.

[instream]

Yes, absolutely. Haven't got around to it yet.

[shoggoth]

/PeP bitchslaps Hencox and InSTream

[alanh]

Now that I'm back to 1.03 (see speckles on output post), this now works

[instream]

Great!

Then we may also need to add a check in svupdXXX.app that the CT60 TOS version should be 1.03 or 2.01.