failing that does anyone have a drawing for 1 of these (if it ever existsed) as i may well get some made up
don't want to pay best electronics prices plus customs tax for a piece of bent metal

Moderators: Mug UK, Adrenalin, Moderator Team
alexh wrote:You should know that they do not secure modern 2.5" PATA hard drives. The screw holes do not align so you have to hold them in place with something like an elastic band.
Chandler wrote:alexh wrote:You should know that they do not secure modern 2.5" PATA hard drives. The screw holes do not align so you have to hold them in place with something like an elastic band.
well all you gotta do is drill some new holes, a rubber band is silly as that will rot in time and the drive could move and.......
Chandler wrote:well all you gotta do is drill some new holes
alexh wrote:I admit that cable-ties are probably better than an elastic band. Whatever you use, make sure you don't cover the HDD exhaust hole(s).
alexh wrote:Interesting. If that would have worked then I would have done that.
Did you have the metal sheild removed?
Dal wrote:I'd drill through the base of the bracket and mount the drive using the screw holes in the base of the drive (rather than mounting the sides).
Users browsing this forum: No registered users and 2 guests