PicoPSU ct60e

Discuss CT60/CT63, CTPCI, SuperVidel and EtherNAT hardware here.

Moderators: Mug UK, moondog/.tSCc., [ProToS], lp, Moderator Team

Reylan
Atarian
Atarian
Posts: 7
Joined: Sat Feb 16, 2019 1:14 am

PicoPSU ct60e

Postby Reylan » Wed Oct 16, 2019 6:53 am

Hello,
after receving my ct60e, i decided to run it with and ATX psu. Now, i have fine system, everything installed on an SD card. It's time to move forward.
I bought a picoPSU-160-XT and the power supply that goes with it. working fine. But when i tried to close the original falcon case, it looks like it's too big.

What are your experiences dealing with this PSU ?

Shall i take a 150 or even a 120?

Arnaud

derkom
Atari freak
Atari freak
Posts: 72
Joined: Fri Jul 20, 2018 10:29 pm

Re: PicoPSU ct60e

Postby derkom » Wed Oct 16, 2019 7:41 am

The 150 will fit. I ran into the same problem with the 160. :)

joska
Hardware Guru
Hardware Guru
Posts: 4420
Joined: Tue Oct 30, 2007 2:55 pm
Location: Florø, Norway
Contact:

Re: PicoPSU ct60e

Postby joska » Wed Oct 16, 2019 8:39 am

If you don't want to spend money on yet another PicoPSU you can modify the one you have:

viewtopic.php?f=97&t=32766#p340857
Jo Even

VanillaMiNT - Firebee - Falcon060 - Milan060 - Falcon040 - MIST - Mega ST - STM - STE - Amiga 600 - Sharp MZ700 - MSX - Amstrad CPC - C64

tjam
Atariator
Atariator
Posts: 29
Joined: Sun Dec 09, 2018 10:54 pm
Location: Finland

Re: PicoPSU ct60e

Postby tjam » Wed Oct 16, 2019 11:20 am

Reylan wrote:Hello,
after receving my ct60e, i decided to run it with and ATX psu. Now, i have fine system, everything installed on an SD card. It's time to move forward.
I bought a picoPSU-160-XT and the power supply that goes with it. working fine. But when i tried to close the original falcon case, it looks like it's too big.

What are your experiences dealing with this PSU ?

Shall i take a 150 or even a 120?

Arnaud


I use 120W flavors for my ct63 and ct60e. If you're located at Europe CarTFT has refurbished stock of 120W for affordable price.

Reylan
Atarian
Atarian
Posts: 7
Joined: Sat Feb 16, 2019 1:14 am

Re: PicoPSU ct60e

Postby Reylan » Wed Oct 23, 2019 7:39 am

Hello,
I think i'll just buy a 150W or 120W. i don't want to bend the card, i need the space behind for the buttons.
Thanks a lot !


Social Media

     

Return to “CT60 / CT63 Area”

Who is online

Users browsing this forum: No registered users and 3 guests