peterlane wrote:Let me know if anything's unclear, or could be improved.
gstoll wrote:In open_vwork you must set work_in to 2 + Getret(). ("work_in = 2 + Getrez();")
qstoll wrote:https://github.com/petercrlane/sokoban/ ... /windows.c : event_loop
It is not necessary to make a #if for some messages. For example WM_SHADED is also pressend in MagiC or WINX.
peterlane wrote:I take it you mean work_in = 2 + Getrez (); ?
peterlane wrote:I put the #if in as I have previously had problems compiling code with TOS 4 features on my STe.
gstoll wrote:Maybe you use floating point. The ST version from AHCC don't support them. With PureC you can use it.
peterlane wrote:Thanks for the suggestion. It prompted me to look again at the Atari Compendium, and I notice it says for work_in: "For screen devices you should normally use the value Getrez() + 2, however, a value of 1 is acceptable if not using any loaded fonts"
I take it you mean work_in = 2 + Getrez (); ?
(I admit, I took the code for open_vwork directly from CManShip and haven't questioned it.)
lp wrote:These off screen calls are pretty cool, but they don't seem to work on any machine using fVDI which drives graphics cards and some clones, like the FireBee.
Users browsing this forum: No registered users and 6 guests