Page 1 of 1

Falcon Parts Wanted

Posted: Tue Mar 21, 2017 6:50 pm
by 10p6
Hello.

I am looking for a metal Falcon PSU Chassis Ideally with the switch and socket. I do not need the PSU, but would consider it too.

I am also looking for the Falcon speaker, but must have the connector on it too.

Finally, I am also looking for an original Falcon internal fan.

If you have any of these that you do not need, and will ship to the USA, please let me know the cost. Feel free to PM or email me if you wish.

Thank you.

Re: Falcon Parts

Posted: Tue Mar 21, 2017 7:50 pm
by 1st1
The internal fan is just a standard part which you can grab from any electronics shop. I use a Sunon with magnetic leviatation system, it is very silent.

Re: Falcon Parts

Posted: Tue Mar 21, 2017 8:29 pm
by 10p6
1st1 wrote:The internal fan is just a standard part which you can grab from any electronics shop. I use a Sunon with magnetic leviatation system, it is very silent.


Thanks for the info. Do you have a part number for this please? I want to replace the Falcon one with one as close to the original as possible, but I agree with the quietness too :-)

BTW, any idea why private message seem to be stuck in the Outbox, or is the system having issues?

Re: Falcon Parts

Posted: Tue Mar 21, 2017 8:40 pm
by viking272
Messages are left in the outbox until read I believe

Re: Falcon Parts

Posted: Tue Mar 21, 2017 8:41 pm
by 10p6
viking272 wrote:Messages are left in the outbox until read I believe


Good to know, especially when I keep trying to send them, lol. Delete, Delete......

Re: Falcon Parts Wanted

Posted: Tue Mar 21, 2017 10:43 pm
by Atari030
Speakers are pretty much off the shelf too, it shouldn't take much to knock one up.

Re: Falcon Parts Wanted

Posted: Fri Apr 07, 2017 8:56 am
by Rustynutt
Did you find a power supply bracket?
Sure I have one.

Re: Falcon Parts Wanted

Posted: Thu Apr 13, 2017 10:06 pm
by leech
Is the bracket so you can build out the thing you were going to do to fit the CT60e power internally (I really want one of those, I'm waiting for a working power brick for the PicoPSU, since I am pretty sure that's my current problem.., but really want the bracket you were working on).