What do I need to connect my STE to the Framemeister?
I assume there is no way of using the Best Electronics VGA cable (VGA to Framemeister?) so do I need to source a Euroscart for the STE and a Euroscart to XRGB 8 pin DIN cable?
I notice this says their SCART cable is not compatible with the Framemeister:https://www.retrogamingcables.co.uk/ata ... le-tv-lead
But they don't say why...
I note the ST can output HSync and VSync seperately, but the RGB Scarts tend to use Composite sync instead.
Does the Framemeister want the seperate HSync and VSync?
If so how do the old consoles work on it as they don't output seperate H and VSync to my knowledge.
Or does the Framemeister need the sync stripping out?
If so I don't see why I can't use the ST RGB (likely composite sync) SCART cable above with this sync stripper cable for the Framemeister from the very same people? But if so why don't they say that?
1977 VCS Heavy Sixxer (Boxed)
1990 Atari 1040STE, 4MB, UltraSatan, TOS 2.06, TT Touch -> Atari SC1435 Colour CRT Monitor
1991 Atari TT030, 2/64MB, Int 8GB Gigafile SCSI2CF, TOS 3.06, CaTTamaran Accelerator -> Atari TTM195 19" Mono CRT Monitor
1993 Atari Falcon030, 14MB, Int 4GB IDE2SD, TOS 4.04 -> Atari PTC1426 Color CRT Monitor
Amiga, Mac, DOS, Newton, SGI, Sun, NeXTStation and more!