GhostLink transfer Targets or Source ?

No topic. Everything you want to speak about. Please just stay courteous.

Moderators: Mug UK, Silver Surfer, Moderator Team

User avatar
Dizzy-WEWRF
Atari maniac
Atari maniac
Posts: 99
Joined: Fri Mar 23, 2012 7:22 pm

GhostLink transfer Targets or Source ?

Postby Dizzy-WEWRF » Tue Oct 29, 2013 8:49 am

GhostLink transfer Targets or Source ?

Some of you may
remember this little software peace
don't you ?

GhostLink V1.02
A program that allows a hookup between an
Atari GEM computer and an MS-DOS slave system.

Ghostlnk.zip 26234 bytes
Ghostlnk.txt 779 bytes

http://www.chebucto.ns.ca/Services/PDA/AtariSTMisc.shtml
http://emulatari.free.fr/
(Sorry I dont know the author of it ...)

Does anyone know
which transfer commands/targets/codes it uses ?
Is there some sort of "tecnical documentation" out there
describing the transfer / filetransfer process of it ?

Or better is there
the source available ?

Source for ST part (Sender /Master) ?
Source for pc part (Receiver /Slave) ?

Perheps in c best in pascal/delphi ?


If someone knows more, then
any kindfull help would be
welcome :)

Thanks in Advance

So long
Dizzy :)
Everything will become well :)

User avatar
Dizzy-WEWRF
Atari maniac
Atari maniac
Posts: 99
Joined: Fri Mar 23, 2012 7:22 pm

Re: GhostLink transfer Targets or Source ?

Postby Dizzy-WEWRF » Thu Oct 31, 2013 12:53 pm

http://www.atari-forum.com/viewtopic.php?f=39&t=25639&sid=8c02f7c250696dbdb0e83d5358ea22e6



Re: GhostLink transfer Targets or Source ?

Postby Zorro 2 » Tue Oct 29, 2013 4:28 pm
It's not a problem mister Dizzy, you have the good thread here : viewtopic.php?f=14&t=1673 about transferring between PC and ST to discuss :D
Member of NoExtra Team



@ Zorro :

Hello, :)

Many thanks for your Tip Zorro, unfortunately
if it is not what I am searching for.

I search technical Deteils in addition to
this small programme with him
Names GhostLink V1.02 as how precisely
and exact it shares its data between the
calculators .
Which byte results ore sequences it uses to request
for files which ones it uses to
open folders which is of use it around
to transfer data and so further on .
So information about that
and on how this programm
shares date. How it is tecnically doing it.

Not after programmes in general which
exchange Data on ST !!!!

I search transfer codes,
Sourcecodes, byte results,
Information about this
GhostLink V1.02 programm!!!!

'Tecnical detailed information'


Thanks in advance
So long Dizzy :)
Everything will become well :)

User avatar
tenox
Captain Atari
Captain Atari
Posts: 376
Joined: Thu Apr 05, 2012 11:52 pm
Location: Sunnyvale, California
Contact:

Re: GhostLink transfer Targets or Source ?

Postby tenox » Thu Oct 31, 2013 6:26 pm

I'm not aware of a source code, but I'll search through my archives. The most obvious way is disassemble or maybe use IDA Pro to generate C code / structures to look at. You could also use a serial port analyzer to figure out the protocol.


Social Media

     

Return to “Chat forum [ENG]”

Who is online

Users browsing this forum: No registered users and 4 guests