krupkaj wrote:Hi Dima,
just test it with the Czech TOS and everything works OK.
krupkaj wrote:Did you set the buffer size? What is the output from rommix?
I have just found it is necessary to stop the line exactly after the command. Check if you have not lines like this: "load o.img 0 128k all -> 0 low "
Dal wrote:Here's a MIX file that will work:
Code: Select all
#Merge 2 TOS BINs into 1 IMG
# Set Buffer
# Set Working Dir
# Pull the HI (EVEN) and LO (ODD) ROMs into the buffer
load TOSHI.BIN 0 128k all -> 0 even
load TOSLO.BIN 0 128k all -> 0 odd
#Dump the buffer to file
save TOS.IMG 256k <- 0 all
And here's the merged TOS 2.05 UK ROM (tested on STeem and a real machine)
Dal wrote:Try running it up with no disk image first. This takes ages to boot as TOS 2.05 does a full RAM test but there is no screen output (Atari Logo, progress bar etc) during this stage. So use the Fast Forward button in STeem to get to desktop!
Dal wrote:Yup - as I stated in my post, tested with STeem (Standard ST, 4MB, UK Keyboard layout).
Try running it up with no disk image first. This takes ages to boot as TOS 2.05 does a full RAM test but there is no screen output (Atari Logo, progress bar etc) during this stage. So use the Fast Forward button in STeem to get to desktop!
Dal wrote:That is exactly what I said.
wongck wrote:Does pressing a key to skip the memory test helps?
avtandil wrote:Yes, it helps a lot, so maybe most of the time is taken by RAM test (and I have it 14 M in STeem) !
IIRC, tos 2.05 does not show Atari Logo and memory test bars when it is testing ram.
wongck wrote:BTW, I saw pictures of your ship
SofiST wrote:There are some hacks which disable TOS 2.06 RAM and ROM CRC tests, so can fast boot without keypressings. If want, I can post here what need to change.
SteveBagley wrote:avtandil wrote:So if anybody have machines with TOS 2.02, 2.07, 2.08, 3.05, 4.01 and/or just some other images, missing in my collection, please try to dump those images and send them to me.
The ST Book TOS 2.08 was posted on here a couple of years ago…
avtandil wrote:I found TOS208 book C302362.003usa_03_16_92_programmer read.zip and TOS208 book C302365.003ger_12_16_92.bin.zip, but couldn't run it with Hatari. OR shoud I play with byte-swapping ?
I think the programmer read ones were corrupt. The ones in download/file.php?id=26328 should be fine…
I definitely had the non-byte-swapped version working in Hatari, but you have to run in ST High and you must select a 14MB RAM configuration since TOS 2.08 reads from $D00000 which Hatari treats as a bus error otherwise.
Users browsing this forum: No registered users and 6 guests