Cyprian wrote:Mikro, is it your page? https://mikro.naprvyraz.sk/docs/mikro/videl.html https://mikro.naprvyraz.sk/docs/mikro/030_stram.html
Cyprian wrote:you mentioned there about now Videl's burst mode, 640x480xtc on VGA and slow data bus. :)
btw. very interesting articles
dhedberg wrote:I do have the original Blow-Up software that has been released freely now. So I can provide a download link for that.
dhedberg wrote: I run my Falcon030 in 1024*768 in 2 and 16 colors with a 50MHz oscillator.
dhedberg wrote:Finally I also had a go with the case for the adapter.
mzry wrote:Since I use Centscreen to set my resolution, will Centscreen automatically pick up on the oscillator and show me more resolution options? Or do I need this special blowup software. Thx.
dhedberg wrote: I don't have access to the Centscreen software but if you can send it to me I would gladly have a look at it. Was it sold along with some hardware? If yes, there's a slight chance that it will have some kind of "identification process" which will prevent it to work with the 3-in-1 adapter (just like the Videlity and Screenblaster software).
Atari030 wrote:Centscreen was designed for the CT2, I have been playing with it a bit lately but I have to say I consider the SBII to be the better setup. Mostly because it works well with my LCD's, but also because it isn't hard to use. I haven't had a lot of luck with centscreen
I have been wondering how many different packages there are out there. There is Blowup, Centscreen, Screenblaster, Videlity and videl inside to my knowledge. I'd love to run package across CT2, SBII/III and the new DH1 so I don't have to faf around.
Users browsing this forum: No registered users and 1 guest