Idek Tramielski wrote:No. I am talking about the surface mounted chip between the VGA bios and the pin header.
Idek Tramielski wrote:Yes...the RAMDAC is what I was asking about. Unfortunately, I do not have a ET4000 with this RAMDAC in my collection, which will make it somewhat difficult. Can you get a different ET4000 card? I will setup my TT and have a look at things, but I don't expect to be able to provide a solution from here.
Idek Tramielski wrote:Try to look for a card that is in my list that I posted here! I will investigate your RAMDAC anyway, maybe I can find a solution.
Idek Tramielski wrote:I have a TR9C1710 and a w82c490P that work. I also own several other ET4000 cards, but need to check the driver compatibility first.
paul92706 wrote:ok i will keep my eye out for those DAC's,but i also appreciate you helping with investigating my card i aslo did some searhing for the list of cards you provided and i found nothing...wow they are very rare.
paul92706 wrote:Good news, i sucessfully got this setup working! Problem seemed to be, poor Ground on the Nova adaptor, i laid down some better ground which is required for high speed circuits, and she came to life. Thanks to you all who helped out!
piku wrote:I had the good fortune of finding a Mach64 ISA 2MB card on ebay. It wasn't cheap but it brought my adapter back to life. Yay!
frank.lukas wrote:paul92706 wrote:Good news, i sucessfully got this setup working! Problem seemed to be, poor Ground on the Nova adaptor, i laid down some better ground which is required for high speed circuits, and she came to life. Thanks to you all who helped out!
Show me a nice Picture from your DIV Nova Adapter ...
frank.lukas wrote:Thanks ...
piku wrote:Yes for the original Nova when it was upgraded from Mach32 to Mach64 I remember a different GAL was needed. So there are 3 GAL configurations? ET4000, Mach32 and Mach64?
Users browsing this forum: No registered users and 7 guests